Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Snapper I524 Snowblower

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions
Search For:
kp123


Joined: Jan 17, 2011
Points: 3
Snapper I524 Snowblower
Original Message   Jan 17, 2011 5:31 pm
The auger on my Snapper snow blower does not throw the snow very far and clogs easily.  Does anyone have an idea what is wrong and how to correct this? 

Thank you
Replies: 2 - 4 of 4Next page of topicsPreviousAllView as Outline
kp123


Joined: Jan 17, 2011
Points: 3
Re: Snapper I524 Snowblower
Reply #2   Jan 17, 2011 5:36 pm
That was the first thing I tried.  It still only throws the snow a couple of feet. 
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622
Re: Snapper I524 Snowblower
Reply #3   Jan 17, 2011 5:44 pm
how is your belt tension?  are they running at full speed? Does your auger spin freely when the engine is off?  If yes, you need to replace shear pins.
This message was modified Jan 17, 2011 by MN_Runner
kp123


Joined: Jan 17, 2011
Points: 3
Re: Snapper I524 Snowblower
Reply #4   Jan 17, 2011 5:52 pm
I was just thinking it might be a loose or worn belt.  I'm going to check that.
Replies: 2 - 4 of 4Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42