Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hi

My snowblower (ariens ST724) will start but not budge.  I pulled it apart and the drive belt was broken and drive plate appears to be frozen.  Replaced the drive belt, started it up and the belt started smoking right away - the drive belt is burning on the top pulley (pulley spinning, belt not).  No change when I try to engage the wheels. 

Any suggestions?

Thanks all, for the advice.

Model - 932032

I'll try loosening up the plate in the AM

It 47 could be rusted or pinched on 50 o 51.  46 could be worn and jamed.

I've removed the pulley, pulled the set screws from the hub and can't remove the hub.  It still turns about a 1/16 of a revolution in either direction.  Will continue with WD40 and try removing the drive plate.

Looks like we now have 3 similar problems.

http://www.abbysguide.com/ope/discussions/55042-0-1.html

http://www.abbysguide.com/ope/discussions/54829-0-1.html

I appreciate the advice from everyone - I think mine is going to the shop.  I tried pulling the axle, but the hex bolt won't back out of the gear, even after the nut is off.  Tried pulling the The drive plate still only rotates about a half inch in either direction.