Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > ill show you mine

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

Knee_Biter

Wicked Pissa

Location: just outside of BOSTON
Joined: Dec 14, 2008
Points: 147

ill show you mine
Original Message Jan 8, 2011 12:22 am

Just the ones I use.

Replies: 19 - 28 of 65

All

View as Outline

jrtrebor

Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Re: ill show you mine
Reply #19 Jan 8, 2011 7:11 pm

Mn Runner
Please don't bait him : ) This thread is going along so nicely. And besides he's not always wrong. No malice.

Knee_Biter

Wicked Pissa

Location: just outside of BOSTON
Joined: Dec 14, 2008
Points: 147

Re: ill show you mine
Reply #20 Jan 8, 2011 7:16 pm

I will get a pic of the part for you and a part number for the Ariens part later when I get a chance. It is just a piece of metal that is orange and has a couple of holes that line up with holes on the side of the chute. When bolted on it extends the chute out so there is no snow blowing past. If you look at the chute on Ilikeoranges Ariens you can see that they made the chute deeper to correct the problem. You can almost see the dip where the metal was extended. jrtrebor wrote:

knee_Biter
Great post, love looking at photos. I be curious as to what Areins sent you to correct the problem you described. I've been toying with a couple of mods to the chute on my repowered
Ariens 1032. One is to taper the deflector. To narrow it down from the back to the front. Just a bit to put a little compression on the snow stream as it's leaving the chute.
I've also have an issue with. I'll call it stray snow, when the chute is turned hard right.

This message was modified Jan 8, 2011 by Knee_Biter

MN_Runner

Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: ill show you mine
Reply #21 Jan 8, 2011 7:26 pm

I was just curious on what kind of response we would get out of it as they are fairly comical at times. Since then I have retracked the bait as I have no desire to make this thread ugly.

MN_Runner

Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: ill show you mine
Reply #22 Jan 8, 2011 7:32 pm

Steve_Cebu wrote:

This is where a tracked model would shine as it could literally chew into ice like that. I figured something might be under the snow because you rode up so quickly. Normally it wouldn't do that.

The key to good video is to frame the shot and don't move or pan the camera very much. My wife is still working on that. Here is an example of a party where my wife got a bit wild with her Filipina friends. But the point is even tho I moved around the room, I tried to do it without a lot of panning. It's not a great example but it's also not on a tripod. It's off topic but I did circle the room to the left and right, it came out ok. This video is safe for work.... mostly.

http://www.youtube.com/watch?v=BczBVNWKZK8

Steve,

It is a 5" thick solid sheet of ice and I am not going to risk breaking the shear pins for my stupid little video. Maybe I have a gift of making any machine look bad as you can see.

Paul7

Joined: Mar 12, 2007
Points: 452

Re: ill show you mine
Reply #23 Jan 8, 2011 7:35 pm

A very nice array of equipment. I like the brace idea. Here's mine... I don't have the 7hp Ariens single stage anymore. I like Ariens two-stage machines but lets just say that Ariens should be banned forever from making a single stage snowblower again LOL.

njal

Joined: Jan 9, 2010
Points: 109

Re: ill show you mine
Reply #24 Jan 8, 2011 7:42 pm

MN_Runner wrote:

Pictures from my backyard/pond.

For video (don't laugh too hard!)

http://www.flickr.com/photos/58015249@N02/5336719527/

Very Nice!!! I enjoyed your video
I think I would get the wheel model if I were to get one now.

nice house !

Steve_Cebu

Joined: Dec 17, 2009
Points: 888

Re: ill show you mine
Reply #25 Jan 8, 2011 7:45 pm

MN_Runner wrote:

Steve,

It is a 5" thick solid sheet of ice and I am not going to risk breaking the shear pins for my stupid little video. Maybe I have a gift of making any machine look bad as you can see.

I think you did ok, your machine looks fine to me. But yeah you don't want to risk breaking the shear pins for a video. When I had my 928 I chewed up like 3 inches of ice. But it took a while crawling to do it.

Your video isn't stupid at all, why say that? Lighten up, it gets better with experience.

This message was modified Jan 8, 2011 by Steve_Cebu

"If you have more miles on your snow blower than your car, you live in New England." "If you can drive 75 mph through 2 feet of snow during a raging blizzard without flinching, you live in New England."

MN_Runner

Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: ill show you mine
Reply #26 Jan 8, 2011 7:56 pm

Steve,

It is very weak compared to your stupendous video clips. Your clips are approaching professional quality. I had to beg my 14yr son to video for me when the temp was around 10F this afternoon. BTW, the video was taken with Cannon IS1300 camera. Wait until we get a monster storm and I will make a better video.

Knee_Biter

Wicked Pissa

Location: just outside of BOSTON
Joined: Dec 14, 2008
Points: 147

Re: ill show you mine
Reply #27 Jan 8, 2011 8:16 pm

Ariens chute baffle part# 524192 00

Knee_Biter

Wicked Pissa

Location: just outside of BOSTON
Joined: Dec 14, 2008
Points: 147

Re: ill show you mine
Reply #28 Jan 8, 2011 8:22 pm

I second the banning of Ariens selling single stage units. I had the same one and my brother has one. It only throws in 1 direction. Turn the chute and it plops out and goes nowhere. Love my Toro single stage units.

Replies: 19 - 28 of 65

All

View as Outline