Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Snow Blower Stalls

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
John_G


Joined: Dec 31, 2010
Points: 3

Snow Blower Stalls
Original Message   Dec 31, 2010 5:48 pm
My Snow blower only runs with the choke full on.  The engine is a Tecumseh HS50 Snow King (according to the sheet in my packet.)  Loosining the gas cap has no effect.  I expect that the next step is to clean the bowl.  Any advice on this task? 

John G.

Replies: 7 - 8 of 8Next page of topicsPreviousAllView as Outline
Shryp


Location: Cleveland, OH
Joined: Jul 26, 2010
Points: 532

Re: Snow Blower Stalls
Reply #7   Jan 6, 2011 3:30 pm
I would not worry about the spring if you don't remember one.  I think that is mainly used on smaller 2 cycle carbs.

The silver pointed thing is the needle that opens and closes with the float to allow the gas to come into the carb.
It should have a small spring type thing clipping it to the float.

Glad everything is working now.
This message was modified Jan 6, 2011 by Shryp
borat


Joined: Nov 10, 2007
Points: 2692

Re: Snow Blower Stalls
Reply #8   Jan 6, 2011 4:30 pm
Good to hear you got it running well. 

You have achieve two important things.  1)  You understand your carb better and are able to repair it.  2) You probably saved $100.00 by not bringing it to a shop. 

So take that $100.00 you saved and treat yourself to something.  
Replies: 7 - 8 of 8Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42