Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Deere 1028E " Very Impressed"

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
hirschallan


If it aint broke don't fix it !!


Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327

Deere 1028E " Very Impressed"
Original Message   Dec 30, 2010 12:47 am
CHXBEACHVA wrote : I looked at the Hondas. They seem to be a very well built machine. Could I afford one....absolutely, but is it necessary to spend $2k+ on a blower, maybe or maybe not. I ended up buying a Deere 1028e and was very impressed how it handled the 18" we just got in Long Island, NY. No bogging at all and cleared right down the pavement. It cut my EOD like butter. My neighbors were definitely happy to hear me coming down my driveway

Replies: 7 - 10 of 10Next page of topicsPreviousAllView as Outline
Chxbeachva


Location: Long Island, NY
Joined: Oct 31, 2010
Points: 52

Re: Deere 1028E " Very Impressed"
Reply #7   Dec 31, 2010 11:00 am
borat wrote:
Sounds like your dealer doesn't like to get his hands dirty.   You sure he's not just a salesman?

What does your engine operator's manual say about the five hour oil change? 

I suggest you do it.  You won't see any difference this year or next.  But ten or fifteen years down the road, you will.  The reason for the five hour oil change is to get manufacturing debris such as filings and machining grit out of the engine.   The reason you run the engine for five hours is to ensure sufficient circulation of oil to get most of the grit into the oil.  Drop the oil while it's good and hot.  Put in any decent 5/10W30 oil and go to work. 


Manual says change at first five hours.  I already bought The Deere Brand 5w30 (manual calls for).  I will change it this weekend.   Thanks everyone.
JohnWI


Joined: Nov 15, 2010
Points: 38

Re: Deere 1028E " Very Impressed"
Reply #8   Jan 2, 2011 5:24 pm
aa335 wrote:
A little due diligence goes a long way.

Google MotoMan and you'll have some fun reading about how he recommends break in.

I generally do the first change at 1 hour, EVEN on engines with an oil filter.  And most importantly with those without one.

I still like the next one at the recommended 5 (or whatever) interval.  What's the worst that can happen?  I spend 5 extra dollars on oil?

ALSO:  I went to warm up the unit for that first o/c and as soon as I let off the choke I was thinking..."man it sure burns off water (vapor) on startup" when I realized it was one of those dang plastic oil caps on the bottom of the engine that had just come loose and was spitting oil.  I shut down ASAP and only lost a couple of ounces but it made a large spray area of oil and forced me to do some extra cleaning of the belt cover area, etc.  What should have been 10 minutes start to finish was over an hour.

Moral of the story?  Be sure to occasionally tighten those stupid plastic plugs!!!

2011 Ariens Pro 28; Toro 210R, older Powerlite and a generic single stage w/ Tec. engine.

God Bless America!

Chxbeachva


Location: Long Island, NY
Joined: Oct 31, 2010
Points: 52

Re: Deere 1028E " Very Impressed"
Reply #9   Jan 2, 2011 7:00 pm
borat wrote:
Other than a few different gizmos, the 28" JD and Simplicity are pretty much the same.  They are very rugged and efficient at moving a great deal of snow with relative ease.  My machine has the 305cc B&S Kool Bore engine it starts and runs great and makes impressive power.   Not sure what the JD has for an engine but if it's the Kool Bore,  keep an eye on you oil level. I've been using synthetic for three season and have noticed oil consumption.  You won't see any smoke or other clues that the oil might be going down.  So check it every couple hours of use. 

Don't forget to do your five hour oil change and check your belt tension and control cables adjustments.  

If you want to keep the paint on the inside of your chute, you  might want to line it with plastic like I did.  

What did you use to make the plastic liner?
Santaclause


Location: northern NY
Joined: Jan 18, 2009
Points: 48

Re: Deere 1028E " Very Impressed"
Reply #10   Jan 2, 2011 7:42 pm
I run full synthetic in my cub cadet 930swe as with all my other power equip.as well as keep them greased just greased the cub up yesterday and gave it a going over was 55 degs here and now its 25 and snowing supposed to get lake effect so who knows 2 inches or 2 foot by morning you never know..
Replies: 7 - 10 of 10Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42