Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

My serial number is too high so my Honda blower is not affected but has anyone taken their Honda blower for the recall repair?  On a side note, My 2005 Honda Odyssey had a brake failure recall and took me two tries to get it right this week.  I hope you guys have much better recall repair experience.  Are there any other recalls on Honda blower?

I wonder if Honda changed suppliers on a part?  It seems odd that a model that really hasn't changed for some time would have an issue like this.  It's not like it's a new model year vehicle.

When did Honda first come out with their tracked snow blower line?  Or the current generation anyway?

borat wrote:
Oh yeah, if I'm out in the sticks, it will be with a pick up truck, domestic preferred just to keep the natives friendly.

MN_Runner wrote:
MY New HONDA snowblower is model HS 928 TAS and is a 2010 model.   Recall ? ?  Not for me !   Recalls are just in case anyway, I've had many recalls on my American Made cars over the years, never had a problem.  My Jeep Grand Cherokee Overland had TWO seat heater recalls one for the OEM seats, athe second one for the Fix, never had a problem with either before or since.  Even the best quality vaehicles have occasional recall notices and service advisories, it just shows the customer that someone's paying attention is all.

borat wrote:

Too bad you can't get the Toyota Hi-Lux 4x4 up there. I had a Hi-Lux when I moved overseas (not the 4x4) and it was an awesome truck! 1000 times better than a Tacoma!

I did have a 4x4 over there and it also was a Toyota diesel but circa 1984! Great truck here are some pics also included is a pic of one mean frankenstein of a truck, no heat in any of these trucks tho since it rarely drops below 80 degrees even at night. The event was in Argao in the Philippines. My poor mostly stock truck didn't finish but it was great fun. These are the sort of trucks you want when living in the boonies.

Sorry for the off topic pics.

New_Yorker,

I thought you got your HS928TA from your friend this year, where he bought it a few years ago.  2010 HS928 (even HS724) models have holes drilled for the sides skids and they come mounted with the snowblower from the factory.  My seral number is SZAS-118XXXX.  Just curious, what are your first three numbers after "SZAS"?

MN_Runner wrote:

That was FrankMA

AA335,

You are correct.  My 2010 model came with the side skids mounted from the factory.  Just curious why New_Yorker's 2010 did not have them on from the factory?  Is it the difference between TA/TAS vs. WA/WAS?

MN_Runner wrote:
Mine did not come with the side skids.  I had to purchase that separately.  Not sure why some would come with them and some don't.

AA335,

I think that is one of the differences between Track vs. Wheel models.  When I look at the manual, the side skids are not intended for the track models  rather are intended for the wheel drive blowers.  Having them might be a bad idea as it may interfere as you move the machine up and down.  I cannot move my snowblower with a foot pedal (I don't have this feature) like the way you can with your track models.  If Honda thought it was better to have the side skids for the track models, I am convinced that they would have mounted them from the factory.   For your track model you have the foot pedal to control how much you want to dig into the ground and having the side skids reduces your control of the height and makes the foot control less effective.

MN_Runner wrote:

The Hondas that I have been looking at this week, all track models, had both skids, side, and behind the scrapper blade.

I was curious why both?

The Yamaha only had the curved skids behind the scrapper. The dealer mentioned that even though you can set the hieght with the Auger Tilt, you still need a stopping point, so you don't push your scrapper into the concrete!

The tilt does allow you to put a lot of weight downward, and I can see the need for skids.

Here is the Honda, showing side skids, can not see the back ones, but they are there,

http://english.honda.ca/HPower/Models/ModelOverview?L=E&Type=SnowBlowers&Series=HS928&Model=HS928TCD

Here is the Yamaha, you can see the rear skids,

http://www.yamaha-motor.ca/display.php?idx=16019&model=3537&group=G&