Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Torn between Honda HS928TCD and Yamaha YS928J
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Torn between Honda HS928TCD and Yamaha YS928J
Original Message Dec 30, 2010 12:21 am |
|
I moved to a new house, top of a hill, with farm land across from my driveway. This is our second winter, and my MTD is not up to the task of clearing the packed snow that blows into my yard, sometimes daily. I have been looking for a couple weeks, and had made up my mind to get the Honda. I had been to the Yamaha dealer previously, but they were not willing to deal. Well today a new twist, I went back to Yamaha, and was offered the YS928J for the same price as the HS928TC. Specs are very similar, with some different features. The Honda has full Joystick control on the chute, and is 100 lbs lighter. The Yamaha has plastic coated chute, manual up/down. Has no shear pins, which may be a bonus, if the 'Shock Protection' works correctly. Also the Yamaha is quiter. I have been reviewing this site, however, there is limited information on the Yamahas, likely because they just came back to Canada in 2009 (15 year Hiatus) and I am not sure if they are available in the U.S. Has anyone out there used these models? Can you offer an Opinion?
This message was modified Dec 30, 2010 by rubinew
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #66 Jan 11, 2011 10:45 am |
|
Ok, So it turns out the Yamaha Dealer in Regina won't see any till mid February, and even then, no promises. I did find one YS928J in Saskatoon, last one in the Province. As Luck would have it, I have a Service Call in Saskatoon today!! So I am heading up there now! I will update tonight!!
|
aa335
Joined: Nov 29, 2008
Points: 2434
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #67 Jan 11, 2011 10:58 am |
|
Ok, So it turns out the Yamaha Dealer in Regina won't see any till mid February, and even then, no promises. I did find one YS928J in Saskatoon, last one in the Province. As Luck would have it, I have a Service Call in Saskatoon today!! So I am heading up there now! I will update tonight!! I know it's tempting to score a baby blue but isn't it late in the season? Inventory is scarce and you are at the mercy of the dealer, plus chasing down remains. Wouldn't it be better to put in an order or deposit for next production delivery. Just throwing it out there for thoughts.
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #71 Jan 11, 2011 11:11 pm |
|
Well I made the PLUNGE!!!!!! I Purchased the YS928J from Saskatoon, and it is one beautifull beast! Wow. I took it for a quick test run, chewed into the side drifts a couple times, made a few turns. It will take some getting used too, but does this thing dig, and eat, WOW. I will have to adjust the skids a touch, I noticed I took some of the paint of the tips of the Auger, so it must just be licking the pavement when tilted forward. The Auger on Yamaha does extend slightly past the sides and bottom of the housing. It is -24C tonight, so a very short test run. I only took a couple quick pics with my phone, will take better pics with a real camera, when I have more time to play!
This message was modified Jan 12, 2011 by rubinew
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #72 Jan 11, 2011 11:13 pm |
|
If he gets the BLUE now, he may have some chance to use it. The winter is not over until May. He got three solid months to use it.
CORRECT!!!
In Fact they are predicting 2-4 cm snow for tomorrow, and 5-10 cm for Thursday. Also the Wind will pick up, so I think I will get lots of use out of this Beast!
This message was modified Jan 11, 2011 by rubinew
|
Steve_Cebu
Joined: Dec 17, 2009
Points: 888
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #75 Jan 12, 2011 1:32 am |
|
Well I made the PLUNGE!!!!!! I Purchased the YS928J from Saskatoon, and it is one beautifull beast! Wow. I took it for a quick test run, chewed into the side drifts a couple times, made a few turns. It will take some getting used too, but does this thing dig, and eat, WOW. I will have to adjust the skids a touch, I noticed I took some of the paint of the tips of the Auger, so it must just be licking the pavement when tilted forward. The Auger on Yamaha does extend slightly past the sides and bottom of the housing. It is -24C tonight, so a very short test run. I only took a couple quick pics with my phone, will take better pics with a real camera, when I have more time to play! Congratulations! Great looking machine you have there. Good for a lifetime. I adjusted my skids after I had gotten mine home. Munching that snow will be a breeze now.
"If you have more miles on your snow blower than your car, you live in New England." "If you can drive 75 mph through 2 feet of snow during a raging blizzard without flinching, you live in New England."
|
|
|