Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Torn between Honda HS928TCD and Yamaha YS928J
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Torn between Honda HS928TCD and Yamaha YS928J
Original Message Dec 30, 2010 12:21 am |
|
I moved to a new house, top of a hill, with farm land across from my driveway. This is our second winter, and my MTD is not up to the task of clearing the packed snow that blows into my yard, sometimes daily. I have been looking for a couple weeks, and had made up my mind to get the Honda. I had been to the Yamaha dealer previously, but they were not willing to deal. Well today a new twist, I went back to Yamaha, and was offered the YS928J for the same price as the HS928TC. Specs are very similar, with some different features. The Honda has full Joystick control on the chute, and is 100 lbs lighter. The Yamaha has plastic coated chute, manual up/down. Has no shear pins, which may be a bonus, if the 'Shock Protection' works correctly. Also the Yamaha is quiter. I have been reviewing this site, however, there is limited information on the Yamahas, likely because they just came back to Canada in 2009 (15 year Hiatus) and I am not sure if they are available in the U.S. Has anyone out there used these models? Can you offer an Opinion?
This message was modified Dec 30, 2010 by rubinew
|
Bill_H
Location: Maine
Joined: Jan 12, 2008
Points: 354
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #45 Dec 31, 2010 12:36 pm |
|
The honda has not been ruled out, but feature wise, it is losing points. The weight thing is the last thing to deal with :-) I'm not sure why you consider weight an issue, unless you plan to lift it into your truck to do multiple properties -- something I once had to do and purchased a Toro single stage for that very reason. Have you considered the advantage more weight brings? Traction. That's A Good Thing, and you'll need as much as you can get from your description of the conditions at your place. It might be a little harder to move around the garage when it's not running, but how many minutes per year are you going to do that as compared to how many hours per year you'll be clearing snow? Just something to consider.
Who the hell let all the morning people run things?
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #46 Dec 31, 2010 12:59 pm |
|
I'm not sure how having a lawyer present would be of any benefit to you. Unless you're looking for a deduction for lawyer fees.
At $300+ an hour, I rather change the shear pins myself. Take the wife and kids out to dinner with that $300 saved on the lawyer.
Hee hee, if I held a shovel like the previous poster mentioned, I would likely need a lawyer.
The problem with the shear pins is that I go to Toronto for a week every month. I can not imagine her trying to change a shear pin, in -20 weather. It is sometimes a challenge to get the old pin out, plus line up the shaft with the auger, when it is cold, and iced, I would be very un popular :-)
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #47 Dec 31, 2010 1:03 pm |
|
I'm not sure why you consider weight an issue, unless you plan to lift it into your truck to do multiple properties -- something I once had to do and purchased a Toro single stage for that very reason. Have you considered the advantage more weight brings? Traction. That's A Good Thing, and you'll need as much as you can get from your description of the conditions at your place. It might be a little harder to move around the garage when it's not running, but how many minutes per year are you going to do that as compared to how many hours per year you'll be clearing snow?
Just something to consider. I fully agree with you, I think the weight will help keep the auger in the snow, and give extra traction.
Just have to make sure the weight does not stop my wife from being able to use it. She doesn't need to be out there for hours, but if she can clear for her Van, then we are good. The tracks are very hard to turn when not under power, even for me. But with the tracks moving, esp on snow, it was OK, not as easy as Wheels, but manageable.
|
rubinew
Joined: Dec 30, 2010
Points: 147
|
|
Re: Torn between Honda HS928TCD and Yamaha YS928J
Reply #49 Dec 31, 2010 1:08 pm |
|
rubinew, I was hoping there would be more Yamaha users on this site. Are you kidding..... here??? Most of the deadbeat broke posters here are homeless guys who get online at the local library. Nobody has the bucks for a decent machine. They post about upgrading to new machines but most cant' afford to upgrade their mittens. You'd do better getting information from the Santaclause guy at a mall. rubinew, you have this but others might want to check it out >>Online Yamaha brochure, has spec's : http://old.nabble.com/file/p30366721/2011_sb_en.pdf
Ouch, deadbeat homeless guys?? I am getting advice from these guys :-)
Thanks for the Link, I did not have that same brochure! I think I see a Yamaha in our future, just need to get one in stock for my wife to take for a test drive!
|
|
|