Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I moved to a new house, top of a hill, with farm land across from my driveway.

This is our second winter, and my MTD is not up to the task of clearing the packed snow that blows into my yard, sometimes daily.

I have been looking for a couple weeks, and had made up my mind to get the Honda. I had been to the Yamaha dealer previously, but they were not willing to deal.

Well today a new twist, I went back to Yamaha, and was offered the YS928J for the same price as the HS928TC.

Specs are very similar, with some different features. The Honda has full Joystick control on the chute, and is 100 lbs lighter.

The Yamaha has plastic coated chute, manual up/down. Has no shear pins, which may be a bonus, if the 'Shock Protection' works correctly. Also the Yamaha is quiter.

I have been reviewing this site, however, there is limited information on the Yamahas, likely because they just came back to Canada in 2009 (15 year Hiatus) and I am not sure if they are available in the U.S.

Has anyone out there used these models? Can you offer an Opinion?

rubinew wrote:

I had my Honda HS624WA for 10 years and maybe went through a total of 6 or so shear pins over the years' and those broke (or sacraficed themselves) as a result of hitting or ingesting hard foreign objects like rocks. I could always identify the reason for a shear pin failure and it was never due to ice or snow alone. I do keep a half dozen or so on hand just in case the plow delivers some rocks or other unwanted debris at the EOD but that's to be expected sometimes. Not sure where this service guy is coming from with that statement except that you can create a premature failure situation if you overtighten the nut onto the bolt (which is all a shear pin is - a nut and a bolt).

You should consider teaching your wife how to change out a shear pin as it is a very easy process (no crawling around required) and would likely give her a sense of ownership and accomplishment. It takes more time to get the replacement shear pin (nut & bolt) and wrench than it does to actually replace it. If you have her do it a few times she will be more comfortable and confident should she ever have to do it under real world conditions. I believe every snowblower out there except for the higher end Yamaha's use shear pins as a fail safe in their augers drives.

rubinew, I was hoping there would be more Yamaha users on this site.

Are you kidding..... here???  Most of the deadbeat broke posters here are homeless guys who get online at the local library.   Nobody has the bucks for a decent machine.  They post about upgrading to new machines but most cant' afford to upgrade their mittens.  You'd do better getting information from the Santaclause guy at a mall.

rubinew, you have this but others might want to check it out >>Online Yamaha brochure, has spec's : http://old.nabble.com/file/p30366721/2011_sb_en.pdf

Shryp wrote:

:-) I might need a lawyer standing beside me as well!!! Hee hee

trouts2 wrote:

Great link. The Yamaha snowblowers look more substantial because of the shroud they put around the engine (I have to admit, I like it). And I like the fact that in their top of the line machines, you can lock tracks to steer. But until you get to the 1232, they look similar to the Honda (except for the blue. Love the blue). I'd guess Honda & Yamaha limit their snowblower sales in the U.S. because of the competition from MTD (and all the brands they own), Toro, Ariens and a host of other brands that make it tough to sell expensive snowblowers in the U.S. And those Yamaha's look every bit as pricey as the Honda's, if not more so. Even my local Honda dealer required people to order larger Honda snowblowers back in July, since they claim to have a hard time selling expensive snowblowers, even in a relatively affluent area.

I'd go with the Yamaha. 

The reason is that it has everything the Honda has, will do everything the Honda can and has important features the Honda doesn't.   Personally, I'd get  YS928J.  Just make sure you have a place large enough to store it and maneuver it in and out.

Also, by giving Yamaha the business, it might help sustain their commitment to providing snow blowers to the North American market.  Something we haven't seen in decades.

trouts2 wrote:

Wow, what great wisdom.  That's useful advice you can take to the bank.  I'm sure you have good story to go with that one.

What is wrong with being homeless?  Or writing something about snowblower from the library?  It is not all that rare being homeless and educated.  But simultaneously being homeless, educated and interested in fine snowblowers maybe remote.  At least it is warm inside and the sidewalks are plowed and the wi-fi is free inside the public library. 

I think you may have seen a movie about this kind of scenario.  I think it had Joe Peschi and Brandon Frasier in it.  :)

rubinew wrote:

The reason there aren't many Yamaha owners on this site is because Yamaha will not sell them in the US. I think that is a bad move on their part but then again look at Toro they still make their own units not chinese clones or cheap jun like some brands and yet people aren't aware of them like they are Ariens. Dealers push Ariens like their lives depended on it at least the ones I've been to. My wife would not be able to change a shear pin. I'd come back and it would need a lot more "Fixing" than a shear pin if she were to try and fix it.

I love my wife but when it comes to anything mechanical she's 100% blonde. ooooooh what does this button do *Press* <<>Warning Self-Destruct<>> BOOM!

trouts2 wrote:
We've been exposed!!!

Trouts you sombiatch......