Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > I have a Honda 13-hp GX390 engine I want to build a monster SnowBlower. What deck should I be looking for that can handle this engine??????
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
edgenet
If you enjoy doing it, It's not work
Location: Toronto
Joined: Nov 27, 2010
Points: 84
|
|
Re: I have a Honda 13-hp GX390 engine I want to build a monster SnowBlower. What deck should I be looking for that can handle this engine??????
Reply #23 Dec 26, 2010 5:43 pm |
|
I found the OEM part number 1501109MA for the pulley I googled the part # and no seller gives the size of the pulley it looks like 2 1/2" (not very scientific) I hate to guess I think I will go with a 3' or 3 1/4" max. and start with a belt 4" longer and go from there. I did get the OEM belts with the snowblower and it looks I will need 3 to 5 inch longer belts The good news there is an adjustment on the idler pulley and the drive pulley Idler pulley is tightened by a spring this should make things a bit easier. Here is a picture of the OEM pulley http://www.torodiscount.com/murray-1501109ma-engine-pulley-2/
If you are getting paid for what you are doing No matter how much you Enjoy it, It's a Job
|
edgenet
If you enjoy doing it, It's not work
Location: Toronto
Joined: Nov 27, 2010
Points: 84
|
|
Re: I have a Honda 13-hp GX390 engine I want to build a monster SnowBlower. What deck should I be looking for that can handle this engine??????
Reply #26 Jan 2, 2011 10:42 am |
|
Here is the completed Monster SnowBlower, I painted the engine Cowling, Tank, Engine Block, Muffler Cover to give it that nice fresh Look. As you can see everything looks nice and stock when buying parts the only thing that is not stock are the 2 belts and they are off the self items. The real challenge was mounting the idler pulley on the drive belt I managed to finish this with scrounged parts I had lying around the garage. One other item I have to change is the 3” drive pulley I made the mistake thinking the 5/8” would work better vs the ½” The only item I have to get is the pilot Jet the original is missing and they are back-ordered from Honda till the end of Jan 2011 If anyone out there has a carb from a GX120 to GX390 or a clone Honda I will buy the pilot jet. All I need is snow here in Toronto it was 50-F the other day. Winter generally starts around Jan 15 in these parts of Canada Now for the Next Project. It will have to be a Bigger Engine and a Bigger SnowBlower. I have my eye on a mint 32-Inch John Deer “How abought a Twin 20-hp engine”
This message was modified Jan 2, 2011 by edgenet
If you are getting paid for what you are doing No matter how much you Enjoy it, It's a Job
|
|
|