Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

O-K, the light kit that is sold as an 'Accessory' for the Honda Snowblowers comes with a standard 12 V sealed beam, like the old car headlights of yesteryear. But it IS Halogen as Honda says, a $10.00 dollar GE Par36 50 Watt bulb that puts out 300 Lumens.  It is in fact manufactured for this and many other applications by a company named (PM) Peterson Manufacturing, (www.pmlights.com)   They list the light in its rubber weather and vibration resistant mount as a Model 507, and if you go to www.foxtaillights.com they sell it for about 30 bucks, without the special HONDA snowblower bracket you need to mount it to the Honda snowblower, for the kit that Honda sells that includes this expect to pay $ 60.00 buckaroos.   Now IF, like me, You want to install a light more modern, capable and bright here's what you do.  You again go to FoxTailLights.com, and buy the PM model 907 light with 10 LED Diodes to light your way and an estimated 100,000 hour durability and an output of 1000 Lumens  . . . that light with the same rubber mount sells for $ 72.00 plus shipping and anything else they can add. 

The light kit, like the Commercial Skid Shoes is supplied with the electroplated zinc, Guaranteed to RUST in record time, bolts, nuts & washers.  If you don't like rust on your new snowblower go to www.allensfasteners.com and replace the HONDA QuickRust hardware with some Stainless Steel.

Incidentally the Peterson Manufacturing (PM) Technical rep said that the OEM accesory light they supply Honda, the 50watt 12V sealed bean requires 2.54 amps, the new LED unit needs just  .51 amps to operate, so the extra power to run the switch is not going to be a problem.  Just make sure the unit gets as good a ground contact as you can or it might  not work. 

PM makes a stick-on reflective in either amber or red they call them "Spitfires", IMHO they are the brightest reflectors I've ever seen should anyone need such a thing.

Here are some pictures

 

bob1459 wrote:

Great Pics! Have you had any trouble with the LED light when it's really cold?

Steve_Cebu wrote:

No trouble...I installed on a 20 degree day too.

bob1459 wrote:

I meant a cold day like we get around here.   Right now it's about 6 degrees and often below zero with the wind blowing. Brrrrrr..

Steve_Cebu wrote:

I don't think the cold will  be a problem.  We get those days here too, but I have not had to use the snow blower with the new light in that condition yet.  Plus I usually start it in the garage first anyway.  I don't shut it off unitl its back in either.  Unless I run out of gas. Is it worth spending the money on it if your light is working?  No...When the light fails, time for the upgrade.  I have had mine for 10 years and the mount broke.  Never had to replace the light bulb on the 507.

bob1459 wrote:

Yeah i would think if it's time to replace the light then LED might be the way to go.

bob1459 wrote:
Thanks Bob,

I'd consider this lightset when my factory installed one fails.

I installed the 907 LED on my Honda HS 828, as a replacement for the 507 halogen bulb, which gave up after 20 seasons.  Red to power, white to ground, soldered bayonet connectors onto the previous setup for quick connections.  Fired it up, works FINE.  Bright at idle, too!

So far, I am a happy camper!