Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Made the engine swap on my Ariens.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Made the engine swap on my Ariens.
Original Message   Dec 19, 2010 10:00 pm
It went pretty well.  The motor bracket for the powered chute cleared by about a 1/4" so I didn't have to modify that. That was an unknown.
Battery hook up was pretty simple. It's pretty cool to just turn the key and have the thing fire up. Added a larger light, kind or a last minute thing. I had the light and everything else I needed.
But will still at some point be putting on either a 30 watt Halogen or LED.  I'd like something with a smaller housing.
Remote throttle works well, did have to tighten up the return spring a little.

The new engine with it's larger tank and air cleaner housing looks huge compared to the old 10hp Tecumseh.
It hasn't sunk in yet that this project is completed. I started looking for engines and planning this about a year ago.

Now all I need is some snow, a lot of snow.  I live in Michigan about 300 miles north of Chicago.  Had some snow but not as much as some other areas.  But I'm right on the lake so you can get dumped on any time.






















This message was modified Dec 19, 2010 by jrtrebor
Replies: 4 - 13 of 13Next page of topicsPreviousAllView as Outline
starwarrior


Joined: Oct 27, 2010
Points: 91

Re: Made the engine swap on my Ariens.
Reply #4   Dec 20, 2010 2:27 am
Nice work...... I like the motor drive chute conversion.

Starwarrior.

 

borat


Joined: Nov 10, 2007
Points: 2692

Re: Made the engine swap on my Ariens.
Reply #5   Dec 20, 2010 9:27 am
Very nice indeed. 

What/how is the chute rotation controlled?  I see the mechanism but I don't see a crank nor a motor on the end.
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Re: Made the engine swap on my Ariens.
Reply #6   Dec 20, 2010 11:23 am

Thanks for all your comments !
shryp
- The orange bar holds a windshield that I made. The bottom of the windshield has ears that slide behind those knobs.
 You slip on the windshield tighten down the knobs an connect the rear braces.
When we get some snow I'm going to try and shoot some video of the blower working.

aa335 - I had to laugh at your comment. I was in the Air Force and your right it does look like an air drop package.
I was going to post a thread on the set up you see for holding down the blower in the trailer.

borat - It is kind of hard to see in the photo where the control rod goes. There are some better photos further down on the page.

 



 


Four way Joy stick for controlling Chute rotation and Deflector angle.




aa335


Joined: Nov 29, 2008
Points: 2434

Re: Made the engine swap on my Ariens.
Reply #7   Dec 20, 2010 2:14 pm
jrtrebor wrote:

Thanks for all your comments !
shryp
- The orange bar holds a windshield that I made. The bottom of the windshield has ears that slide behind those knobs.
 You slip on the windshield tighten down the knobs an connect the rear braces.
When we get some snow I'm going to try and shoot some video of the blower working.

aa335 - I had to laugh at your comment. I was in the Air Force and your right it does look like an air drop package.
I was going to post a thread on the set up you see for holding down the blower in the trailer.


That windscreen looks like riot gear.  Just paint the snowblower white and you're ready for UN peace keeping mission.

Have you used it in the snow yet?  The windscreen doesn't have any wrap around and you may get snow build up on both sides.  Also, you may have to tilt it forward to minimize build up, similar to the windscreens on battleships.
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Re: Made the engine swap on my Ariens.
Reply #8   Dec 20, 2010 3:11 pm
No, I really haven't gotten to use it yet.  And to tell you the truth I'm really not expecting much out of it.
Maybe just keeping snow from blowing directly back in my face. Your right that I may get snow on both sides.
I guess the type of snow will be the biggest factor in whether or not that happens.
I'm just north of you up around Grand Haven. I think you've had the same hit and miss storm season we've had.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Made the engine swap on my Ariens.
Reply #9   Dec 20, 2010 4:29 pm
jrtrebor wrote:
I'm just north of you up around Grand Haven. I think you've had the same hit and miss storm season we've had.

According to the Farmer's Almanac prediction for this year, the west is supposed to gets lots of rain, the east lots of snow, and the midwest lots of cold.  I think mother nature needs to have a talk with old man winter because I got two snowblowers that needs action, and I got to brush up on my rear wheel drive snow driving technique.  Drifting on salt powder doesnt count.
chefwong


Joined: Dec 18, 2004
Points: 175

Re: Made the engine swap on my Ariens.
Reply #10   Dec 22, 2010 11:01 am
Looking good Jtrebor. Thanks for sharing.
Love the ingenuity, craftsmanship, and all out ~modding~....

Keep the postings going. Love the inspiration.
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Made the engine swap on my Ariens.
Reply #11   Dec 22, 2010 5:44 pm
Yes, very nice modding indeed, everything looks almost OEM. I see you added the battery holder, modded the belt cover, added some protection for the starter assy and a cover for the carb. We need some all round shots of the carb cover especially.
Is it an 11 or a 13HP?

Cheers

https://t.me/pump_upp
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Made the engine swap on my Ariens.
Reply #12   Dec 22, 2010 5:55 pm
OOPS, never mind the pictures, I just found your other post. it was me asking about Honda clones in the cold.
This message was modified Dec 22, 2010 by GtWtNorth


https://t.me/pump_upp
tkrotchko


Location: Maryland
Joined: Feb 9, 2010
Points: 143

Re: Made the engine swap on my Ariens.
Reply #13   Dec 22, 2010 6:20 pm
Nice job. I think I recognize the original engine as a Sno-King. One of those served me very well for 13 years. And I became an expert at cleaning the carburetor in 20 minutes. Now you just need to paint the gas tank Ariens Orange ;)
Replies: 4 - 13 of 13Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.