Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Need some help deciding on a new blower

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
stresst


Location: The Village in the Middle of New York
Joined: Dec 11, 2010
Points: 213

Need some help deciding on a new blower
Original Message   Dec 11, 2010 10:58 pm
First time posting, hope you can help me decide.
 I was in the market for a blower a few months back but thanks to my POS water heater going bad, I had to put it off till now. Been doing my research and have it limited down to a few units. Any help would be appreciated. The first one is the Ariens 24" Deluxe but not too confident in the subraooooo engine. Next up is the Ariens 24" Platnium but @ nearly 1300.oo not sure. Next up I like the craftman 26" w/ 208cc engine, power steering. Not too keen of the craftsman but how can I go wrong? They offer a 5 year extended in home service contract for about 250.00. (799+250 im still 300+ cheaper then the Ariens). Lastly I like the Toro 826 OXE 38624W.

BTW, im located in the New York City and the area I need to maintain is kinda small. I have about a 16' x 50' sidewalk, narrow single car driveway about 80' long (houses on each side) which fans out to about 4 cars wide and the other end I get a mountain of snow from NYC sanitation plows.
Any input on these particular machines?


TORO 826OXE
Replies: 8 - 11 of 11Next page of topicsPreviousAllView as Outline
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Re: Need some help deciding on a new blower
Reply #8   Dec 12, 2010 7:26 pm
Something seems fuzzy. Just for yucks I looked up the spring mentioned (I used the SX21 on the Ariens 724). It’s available all over the net, even Amazon for $6. Right, this is now the story was “then”. Not questioning you stresst but something does not sniff right with “no parts”.
NotMoneyGuy


Location: Toronto & north of
Joined: Nov 10, 2010
Points: 87

Re: Need some help deciding on a new blower
Reply #9   Dec 12, 2010 7:42 pm
@ trouts2

Is stresst not talking about engine parts for a Sno-Tek's Chinese LCT engine, and not parts for a Subaru engine on a real-deal orange Ariens?

Ariens Deluxe 28  921022  WI, USA      --      Poulan PRO PR621ES 208 cm3 961880002-00

stresst


Location: The Village in the Middle of New York
Joined: Dec 11, 2010
Points: 213

Re: Need some help deciding on a new blower
Reply #10   Dec 12, 2010 8:23 pm
trouts2 wrote:
Something seems fuzzy. Just for yucks I looked up the spring mentioned (I used the SX21 on the Ariens 724). It’s available all over the net, even Amazon for $6. Right, this is now the story was “then”. Not questioning you stresst but something does not sniff right with “no parts”.


Ok.......so what the heck are they both talking about?? Hope its not some BS ploy to get me to spend double the money nevermind I dont think home depot would carry a line if parts were not readily available but you sort trust what local dealers are saying.........I cannot wait to go back there. Do you have the part number for the spring? I want to go there with a print out and see how he responds.
This message was modified Dec 12, 2010 by stresst


TORO 826OXE
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Re: Need some help deciding on a new blower
Reply #11   Dec 12, 2010 10:40 pm

NotMoneyGuy – stresst said Subaru so…   Ariens these 920402 920403 Ariens SnowTek 24 & 28 inch slow with LCT

 

and

 

these 921020 with Subaru.

>>so what the heck are they both talking about??

 

   Who knows?? The reasons could be all over the place and with justifications spanning fantasy to real.  Where are you located? 

    It could be their supplier/warehouse was out or does not stock things they needed.  Maybe it was all unlucky coincidence.  Maybe they trashed their relationship with Stens.  Whatever.  Two dealers saying they are dropping a line for the same reason is interesting and a surprise. 

 

http://robinamerica.com/smanuals.aspx?sid=59

You can get the user and parts manuals there and get the spring number.   On taking a quick look it seems there is a Stens spring that is very available.  I’m not sure if Stens has an agreement like it did with LCT or just a second source for some Subaru parts.  Possibly Stens is the only outlet for SX21 parts.  ??   It’s hard to tell if a suppliers part is a Subaru part or an aftermarket.  Some suppliers say and some don’t. 

   In order to make a story more flowing it could have been he had a hard time getting a cowling section and just filled in the part as spring.  Maybe he could have gotten the part in two weeks but the customer was giving him a hard time so installed the electric start at a discount.  But two dealers makes it different.

This message was modified Dec 12, 2010 by trouts2
Replies: 8 - 11 of 11Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42