Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Track snowblowers are a bear to push when the engine is off.  The honda I just bought is very difficult to push in just a straight line (After DIS-engaging the Transmission -Or You can Do Severe Damage).  I simply tipped it up in front, slipped a 'Creeper' (those things you lay down on with wheels under them so you can slide under the car to work on it) under it, tilted it forward so the tracks rest on the frame of the creeper, and now I can easily roll the machine any where I want with very little effort. I've even decided to fasten a piece of 2 ft X 4 Ft Plywood (1/2" or heavier) so it doesn't have to be aimed so precisely when doing this.   It has the advantage of being able to move the entire snowblower in any direction, even sideways when desired.  The Creeper I used was a Free bonus when I bought a floor jack from Summit Racing some years back, and I rarely ever used it.

I use my son's skateboard with my Honda HS928TAS. I lift the handle bars to elevate the tracks while shoving the skateboard underneath the middle with my foot. Then let it down. It becomes wobbly and unstable but it's easily controlled and maneuvered. Can be rested a bit off-kilter with one track or the auger housing on the ground. I remove the skateboard when I have the machine where I want it. This is a good approach because it works with something many people already have in the garage, and you don't have to buy or make anything. PS - my first post on this b-board.

DIYer wrote:
Snowmobile dollies would work good as well.