Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Track snowblowers are a bear to push when the engine is off.  The honda I just bought is very difficult to push in just a straight line (After DIS-engaging the Transmission -Or You can Do Severe Damage).  I simply tipped it up in front, slipped a 'Creeper' (those things you lay down on with wheels under them so you can slide under the car to work on it) under it, tilted it forward so the tracks rest on the frame of the creeper, and now I can easily roll the machine any where I want with very little effort. I've even decided to fasten a piece of 2 ft X 4 Ft Plywood (1/2" or heavier) so it doesn't have to be aimed so precisely when doing this.   It has the advantage of being able to move the entire snowblower in any direction, even sideways when desired.  The Creeper I used was a Free bonus when I bought a floor jack from Summit Racing some years back, and I rarely ever used it.

I use a furniture dolly with two pieces of 3 feet of 2x4's screw on top of it for the tracks to ride on and to support the bucket.  Tip the dolly down and the 2x4 becomes ramps.  Put the ramp behind the tracks and pull it reverse and you can get it on the dolly without using the engine to climb the ramp.

What's with the Girlyman stuff, dollies and babby carriers?   Are you guys dancing with the snowblowers out in the garage?  Are you moving them out of the way everytime you pull the car in and out???  What's with the specialized transport.  Why don't you just start it and drive it to where ever?   The Honda is the easiest starting engine in the industry.

trouts2 wrote:
Those of us with tracks just thought it makes sense to have a dolly.  Ask other people who have Honda tracks.  It just works.  Whether engine is easy to start has nothing to do with it. 

I put my snowblower on dollies and move around to clean the garage.  On the off-season, I don't want to start it  and then have to summerize it again.  It stinks up the garage with unburned hydrocarbons when the engine is cold. 

trouts2 wrote:

I guess we girlymen are just Smarter is all.  Snowblowers spend the bulk of their lives in storage. For you Manly heman manly Types who obviously Don't Know, let me explain it slowly for you.  Storage means draining all the gas, putting oil through the spark plug hole into the combustion chamber so the cylinder and piston rings don't rust (Snowblowers have no Air Cleaner and therefore injest water when doing what they are designed to do).  One then should pull the starter cord until it reaches its point of maximum resistance, this means all the valves are in the closed position so no dirt and moisture can enter the cylinder.  The machine is then covered because we girlymen would have already cleaned, wax'd. and lubricated/greased it and we'd want to keep it clean. 

This might be a tad much for you he-man manly types, but filling the snowblower with gas, and starting it to move it around during the off season does the machine harm by negating all the storage work that you should have done to properly care for the machine.  Placing the snowblower which is very hard to push,( and in the case of Honda Snowblowers one can severely damage the Hydrostatic Transmission if it is has not been disengaed first), on a dolly to make it easy to move is wise, and protective of a considerable investment, a Honda Snowblower like mine.  

Incidentally, this is one girlyman who has a Combat Infantry Badge and a number of decorations having served in the 1-505, 3rd brigade 82nd Airborne Division during the war in Vietnam.  Arnold Schwartznegger who first coined the phrase never had a shot fired at him in anger, he was just pretending to do what this girlyman did.  So what manly he-man accomplishments have you made to qualify for calling anyone else a girlyman ?

   OK! OK!  From the comments of both of you I made a big evaluation mistake and way off with the Girlyman comment.  I take it back.  No attack or manliness offence was meant in the slightest.

 

   From the posts it’s looking like a cleanliness thing instead.  Some people have it and some don’t. Who’s to say what’s normal and what’s not anyway?  Some people just have higher standards about particles and dust.

 

I had heard about this type of thing before and saw it in one of my profs at school.  He would come into the room slowly and carefully and pull out his handkerchief to wipe off his seat and desk.  He’d wipe the draw handles and in between the slats of the chair back.  When satisfied there was not more contaminant around he would walk out of the room to shake out the handkerchief  then put his briefcase on the desk and sit down.  I’m sure if he could have controlled the environment he would have brought a sheet to cover the desk and chair for the next day but it was a common room that others used. 

 

You guys have garages so you can control your area and have made dollies to ease cleaning and dusting.  That’s perfectly reasonable for those that have a deep rooted psychological urge to keep things in proper order, everything in it’s place. 

A psychologists friend of mine says it’s very common for people with this penchant to favor Hondas, red Hondas.  More studies are needed he says but something about the slickness of the Honda and the color trigger people of this type to bring home Honda’s. 

 

He says many of his patients of this type with Hondas cordon off areas in their garages and paint the floor and walls around it white to make the grime show up better so it can be rooted out quickly before dust can damage the machine. 

Some of his clients complain of back injuries with having to move the machine around so often but some he says are very clever and have made devices of all sorts to facilitate easy movement of the machine for constant cleaning. 

A few clients he says have even lost their jobs due do showing up late for work because of the time involved in cleaning.  It works out though as most of those he said get on welfare and can hang out in the garage cleaning.  He says they are much happier and have better life attitudes. He said the clever ones who have the paint and machine movement facilitators hardly ever suffer a job loss as they are much more efficient at cleaning and can still hold down a job. 

There were a few he noted that went overboard and the issue was becoming problematic.  They had installed industrial dust and dirt collectors near their machines and large fans to blow grime away over to the collectors.  Some were becoming broke using up life savings and pulling money out of their retirement savings for purchasing of endless stream of devices like vacuum cleaners, cleaning and waxing agents.  One guy had a spare bedroom in the house filled to the ceiling with cleaners.   

 Compared to the many who suffer from this issue you guys with dollies seem to be on the cutting edge, way ahead of the pack and getting the job done efficiently without great disruption to your lives. Congratulations.

That's freaking hillarious Trouts.  And it all started with a simple dolly and a red snowblower.

Funny thing is that I had thought of doing all those things to my garage, but like most people, I have a job and family commitments that puts my dream of an FDA approved clean garage / workshop in the back burner.   You know, the kind of workshop that even Norm Abram would envy.    Some day when the kids are all grown up and self sustaining, I might have to revisit those plans again.  Until then, time is so precious for that dream.

You forgot to mention something about the automated high pressure car wash and the hydraulic lift for snowblowers, tractors, and lawnmowers for storage, with an air handling system for temperature controlled storage.  A separate garage door for entry and exit.  And lastly, an air curtain to blow off contaminants before the car enters the garage.

Yo Trouts:

Isn't there a name for that particular disorder? 

Let me think......let.... me....think.....

Yeah!  OCD .  That's it.  

I know people like that.  Cleaning, waxing & polishing but don't know where the oil drain plug is.   They have hundreds tied up in cleaners, waxes, disinfectants and magic Sham-Wows but don't own a wrench or a screw driver!

borat wrote:

Ever since I discovered the that drain plug, by accident from tooling around with my $150 Snap-On 3/8" ratchet, I've been doing engine flush on a regular basis every 3.0 months.  It's good to keep those acids and moisture at bay from the mildly hydroscopic synthetic lubricant.  You should see my closed loop fluid exchange system, mildly modified from an old dialysis machine, precise to .5 ml per hour.  

I even dynamically balance on the Hunter and rotate my lawn mower tires too.  The wheelbarrow wheel gets nitrogen filled air, but not balanced.  

I got wrenches and screw drivers, metric and standard, various lengths in 5mm increments, with bar codes and computer catalogged, arranged neatly in pull out drawers.

Now where the heck is that snow?  There's people with new snow removal equipment dying to try it out.  Until then, we're just going to sit here and b*tch about dollies and red snowblowers.

aa335 wrote:
I know it might sound a little crazy, but I used to change the air in my tires on my old HS624WA from summer air to winter air in the late fall. It cost more than regular air but I think it made a big difference. Got tracks this year so I don't need to spend the extra $$$ on winter air any longer, although the guy that sold me the winter air said he has some special traction spray for the tracks. I'll let you guys know how it works after the first snow. Got to go and plant those magic beans I got from him last week...See ya!

If you're paying more than $50 per gallon for that traction stuff, you're paying too much.  I got my own Super-Tacky house blend (secret sauce) that costs 30% less with coefficient of friction of .95  It's safe to eat and very sweet.

I even got a blend of 1.25 in the works, just a bit more expensive.  Still working out the kinks.  It works too well, even ice and snow sticks to it.  Think of a wet tongue on a frozen flag pole.