Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I have an old Ariens 5 hp Mod #924036 snowblower that runs great.  Problem is the drive wheels.  How does the drive plate make contact with the friction wheel?   I've adjusted the handle all the way out and it still doesn"t make solid contact.  I've also replaced the friction wheel and that hasn't helped.  It seems to have solid contact in reverse, and it does drive slightly in the forward speeds.  Could the drive plate be uneven?  Any suggestions would be greatly appreciated.  Anticipating the first snow soon.

The one I picked up wouldn't disengage and I had to oil it.  Try separating the auger from the tractor and you will see the pulley that activates the drive.  I sprayed some PB Blaster down there to clean it out and then put some oil on the part that moves back and forth.  While you have it open make sure the spring is still there.  Mine was just all gummed up and needed some lube.

If you push the handle up and down you will see how it moves.

Thanks a lot.  I'm going to separate the auger and quit for the day.  It looks like I'll replace the belts while I'm at it.  Looks to me like it needs a good lube.  Thanks again.

OK, if you need more help some pictures might help.  I don't have any pictures of mine apart and I don't feel like taking it apart right now :)

When I picked up mine the lever would not come back up on its own.  I had to pull it back up to disengage the drive.

Brought tractor into work.  Removed flywheel and found the fork that moves the spindle was broken.  Quite a job getting the piece out.  Mechanic will clean and re-weld the part and should be good to go.  Needs some lubrication.  Thanks for the advice.

Glad you found the problem.