Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Grease for old Toro 5/26 snow blower

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
gully


Location: York County, Maine
Joined: Jan 27, 2005
Points: 1

Grease for old Toro 5/26 snow blower
Original Message   Jan 27, 2005 9:22 pm
I recently bought an old Toro 5/26 snow blower thats, I will guess to be 30 yrs old at least.  It's pretty well used but still  quite an impressive little machine.  I would like to know where the grease points are. There are a couple of threaded holes with set screws in them back at the impeller (a good place for grease fittings?)  And another threaded hole(with set screw)  up front  at  the  gearbox  for the barrel style auger.  help and advice would be greatly apreciated to keep this 5hp piece of history alive.  One more thing ...its friction drive and likes to run in reverse in 1st.
God Bless Synthetic Oil,    Jim

198? Craftsman 3.5 hp rear  tyne tiller
1987 Craftsman 12.5 hp lawn  tractor
2003 Craftsman  5600w/8600 surg generator
2000  Stihl 029 Super  Farm Boss
198? Kemp 5 hp chipper /shedder
Old    Toro  5/26  5 hp  snow blower

Replies: 1 - 2 of 2View as Thread
Replies: 1 - 2 of 2View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.