Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > How Long Should The Deflector Be?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
DavidNJ


Joined: Sep 26, 2010
Points: 206

How Long Should The Deflector Be?
Original Message   Oct 13, 2010 12:44 am
This is what Husqvarna says:

The deflectors vary in size by brand. Does their length make a difference?

Replies: 2 - 11 of 13Next page of topicsPreviousNextNext page of topicsAllView as Outline
slinger


Joined: Sep 22, 2010
Points: 158

Re: How Long Should The Deflector Be?
Reply #2   Oct 13, 2010 8:20 am
From what I'm told...it's the girth that really matters... 
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Long Should The Deflector Be?
Reply #3   Oct 13, 2010 9:54 am
No, it's the angle.
JimmyM


Joined: Dec 20, 2009
Points: 82

Re: How Long Should The Deflector Be?
Reply #4   Oct 13, 2010 10:06 am
aa335 wrote:
No, it's the angle.

Plainly, you have skills.

re: the extension. I see it as an aid to extend the confinement of the slow before it enters the air and thus allowing it to get slightly further away before wind can affect it. Based on that assessment, I see it only helping with light snow.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Long Should The Deflector Be?
Reply #5   Oct 13, 2010 10:30 am
JimmyM wrote:
Plainly, you have skills.

re: the extension. I see it as an aid to extend the confinement of the slow before it enters the air and thus allowing it to get slightly further away before wind can affect it. Based on that assessment, I see it only helping with light snow.

Thank you, I'll take that as a compliment.  It's quite easy actually, I just have to point it up and it shoots all by itself.  Just pull this orange lever on the console. 

re:  those flappy things are only useful with the light powdery snow in windy conditions.
JimmyM


Joined: Dec 20, 2009
Points: 82

Re: How Long Should The Deflector Be?
Reply #6   Oct 13, 2010 10:41 am
aa335 wrote:
Thank you, I'll take that as a compliment.  It's quite easy actually, I just have to point it up and it shoots all by itself.  Just pull this orange lever on the console. 

re:  those flappy things are only useful with the light powdery snow in windy conditions.

It was a compliment.
"Shoots all by itself". WOW you DO have skills. I don't have an orange lever on mine. It's a CubCadet.

I agree. Light snow on a windy day.
DavidNJ


Joined: Sep 26, 2010
Points: 206

Re: How Long Should The Deflector Be?
Reply #7   Oct 13, 2010 11:54 am
Now blowing back is a problem. Even with a cab it is problematic, coating the clear plastic and blocking the view. This should keep the snow stream a little tighter. From the pictures it looks like it double the length on the Husqvarna.

Husqvarna marches to a different drummer in snowthowers. Their handlebar design is similar to Simplicity, but taken a step further. They use cables to remotely rotate the chute. Their friction wheel control is variable instead of notches. Their scoop has reinforcing beads on its back surface. And they decided to spend the money to manufacture and add this part that is probably similar in cost to drift breakers.

In many areas a great product isn't one thing, it is the sum of lots of little things.

This message was modified Oct 13, 2010 by DavidNJ
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Long Should The Deflector Be?
Reply #8   Oct 13, 2010 1:32 pm
DavidNJ wrote:
Now blowing back is a problem. Even with a cab it is problematic, coating the clear plastic and blocking the view.

No problem with my cab, just a light tap on the clear plastic and the snow just shed right off.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Long Should The Deflector Be?
Reply #9   Oct 13, 2010 1:54 pm
DavidNJ wrote:
Husqvarna marches to a different drummer in snowthowers.

I would say that Toro beats its drum louder and faster in that regard, IMO.  They have closed drum auger (discontinued) , pivoting scraper, powershift models (discontinued)  which moves the wheel axle rearward to put more weight on the front bucket, and their PowerMax auger system.  Just to name a few out of the box innovations.

The problem I have with Husqvarna product is the dealer network.  Around here, finding a dealer who carries Husq products is harder than a BMW dealer in Detroit.  You can get some valued priced Husq products at Home Depot, but not the higher models.  While Husq webpage shows quite a few products, I can only find 10% of those locally.  They are the Peugeot of snowblowers.
DavidNJ


Joined: Sep 26, 2010
Points: 206

Re: How Long Should The Deflector Be?
Reply #10   Oct 13, 2010 2:26 pm
aa335 wrote:
I would say that Toro beats its drum louder and faster in that regard, IMO.  They have closed drum auger (discontinued) , pivoting scraper, powershift models (discontinued)  which moves the wheel axle rearward to put more weight on the front bucket, and their PowerMax auger system.  Just to name a few out of the box innovations.

The problem I have with Husqvarna product is the dealer network.  Around here, finding a dealer who carries Husq products is harder than a BMW dealer in Detroit.  You can get some valued priced Husq products at Home Depot, but not the higher models.  While Husq webpage shows quite a few products, I can only find 10% of those locally.  They are the Peugeot of snowblowers.



Peugeot has dominated the World Rally Championship:

The local Ariens dealer is also a Husqvarna, the others are about 30 minutes away. They are much more common for mowers than snowblowers. Porsche was once a similar boutique brand.

In the Deere/Husqvarna one seems a little better designed in the details, a little higher quality components, maybe a much faster impeller speed, has left/right freewheel steering and hydrostatic drive with both its advantages (low speed, moisture tolerance) and disadvantages (astronomincal maintenance costs). The other is appears more rugged, has a limited slip differential, very slick electric chute controls, and is $400 cheaper.

aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Long Should The Deflector Be?
Reply #11   Oct 13, 2010 2:55 pm
Peugeot may dominate WRC, but they're extinct in the US market.  Hence, my reference.

My point is that Husqvarna products are not well supported in the US.
Replies: 2 - 11 of 13Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.