Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Ariens mounts there motors behind the axle, moving weight of the scoop. It definitely makes it easy to handle; so far, it is the only 30" that doesn't scare my wife. However, not scaring my wife isn't the main criteria.

If the weight is on the nose it resists riding up. If the weight in on the rear wheels it aids traction. Going uphill, additional weight transfers to the wheels. Going downhill, it transfers to the scoop. Although that may or may not be significant.

So which is better? The most bias to the wheels as possible?

As a side bar, several snow blowers have optional weights to go on the scoop. These typically are on the top, a bit forward of the skid shoe. And rather small, 10#. More like an offset for a cab. Is higher overall weight better? Is it better to have 80# on the nose and 170# on the wheels or 150# on the nose and 170# on the wheels?

Time for a recap!

OK, the John Deere machine is bad because there is not enough leverage at the handlebars to pick the scoop up and turn.

The Toro is great because it is effortless to pick up and turn.

The Husqvarna Crown is great because he can put his full weight on the handles without the front coming off the ground.

The Toro sucks because any little bit of pressure on the handles cause the front to come off the ground super easy.

OK, where were we?

Shryp wrote:
You forgot to mention (incessantly) that anything Honda is terrible and overpriced.

You also need to include that  "The Husqvarna Crown is great because no one on this forum has used it and I can't figure out how the auger works."

You're like a train wreck.  It's a tragedy but everyone keeps looking.

aa335 wrote:

Lets not forget that anyone who disagrees with him has to be a democrat (I don't get that reference)

This guy is trolling he's posting nonsense and asking nonsensical questions.

Oh and that Husqvarna looks like it will bite off more than it can throw. Time weighs heavy on his hands if he's weighing the air in the tires.

Yeah, that's a pretty darn tall bucket on that Husqvarna, with an itty bitty 12" auger.

I see an issue for David.  It's going to crawl cause it can't chew all that snow.  Time for a binary decision tree.