Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Here I've been thinking 2009 Subaru powered Ariens Deluxe 30", 2010 B&S 342 Ariens Platinum 30", B&S 342 Toro 1128 and now a Deere 1330SE pops up.

Net, 14" auger, 342cc B&S, same Hillard AutoLok differential as Ariens Platinum (does Ariens make it?), electric hand warmers, electric chute rotation/deflection adjustment (still can'd decide if this is a good thing), slightly bigger tires than the Ariens or Toro (16x6.5), cast iron gear case. It includes drift cutters for a price of $1500, less than all but the Ariens Deluxe.

It is sold by a dealer and by Lowe's (same price, dealer has cheaper delivery). Is this made by Ariens? Is it any good? Is the Impeller also 14"

Update, the 30" looks like a Smplicity Large Frame, the 32" a Simplicity Signature Pro Commercial. Specs are the same except for the differential (Simplicity's free the left wheel), hand warmers (NA on the Large Frame), and color.

Yes I saw the same machine on the net and looks like a Simplicity with some extra features for a decent price.  I would also be interested in hearing anything about this machine vs the Ariens units.  I seem to be wrestling with some of the same issues that you are right now.  People think that I'm obsessed with this but I like to research things that I see as long term investments.

Hey folks...brand new here, but I thought I better sign up cause I tend to research the crap out of everything before I buy...drives my wife nuts. But anyways...I thought i had it all figured out as to which snow blower I was going to buy. I had my mind made up and was bound and determined that I was going to get an Ariens Pro 28...fully loaded and more power and options that I could ever want, and was built like a brick ****house. So I went in to the dealer that handles them and was looking right the machine and then the guy asks me if I've ever considered a John Deere? After what probably seemed like an entire minute with a really dumb look on my face, I said no not really. Then he shows me the John Deere 1330SE. B&S professional series engine with 16.5 ft./lbs of torque (best guess after much time on the net is that it is around 13 hp) and all the best features plus the electric chute control both left/right and up/down. Two settings for the hand warmers, and still built like a brick ****house. They wanted around $2600.00 for the Ariens and $1500.00 for JD. Boy that 1330SE sure looks good sitting in my garage and the $1100.00 I saved looks even better in my account. Can hardly wait for snow. Take care.

After thinking about things a little more and reading trouts2's guide to snow throwers I realized that I didn't need the 1330SE or any other 30" machine.  If I'm buying for the average snowfall where I live, even the Ariens Platinum 24 that I bought will be more than enough.  But the Deere does appear to be feature rich and sturdy for a decent price.  Good luck with it this year and let us know how you like the electric chute controls.

slinger wrote:

I view the design criteria a bit more like HVAC criteria: able to handle the 99th percentile condition but operate efficiently during the many smaller storms. The latter, at least for us, favors a wide scoop. The former would probably favor a tracked model like the Yamaha.

Fish_Hunter, how do you find the handlebars? Do they seem a bit weak and the system a bit heavy to muscle around? I do agree, it seems to be the best value out there.

I can only comment on what I've tried so far in my garage and on my driveway as far as steering. It seems to work great on dry conditions. As I push forward on one handle and pull back on the other, the one wheel seems to stop while the other one pulls the machine around the corner. This thing is still so new to me that I have to play with it a bit more to really understand how it does what it does.

Slinger:  Congradulation on your resisting the temptation.   Many make the mistake of buying for worse case and most regret it later although it takes a few years of dragging around a big machine to cave in and admit the mistake.  I pickup big machines often from people who are happy to get rid of them.  Tough to resist a big toy but unless you're in a snow belt they hardly get used.  I'm 25 miles west of Boston where there is not much snow per year.   

The Ariens 1124 was a 11.5 Tecumseh OHV on a 24 inch intake housing, model 924122.  It was a fantastic machine with CI and full differential of the old hand switchable style at the wheel.  I'd take that anyday over the newer full differential.  The rakes were 16 inch, impeller 12 with a 4 blade impeller.   It was the last year I know of to have a cast iron gearbox with cone roller bearings on the auger drive shaft.   I kept it for one season then sold it to make room for something else to try out.  It was a great compact tiger.

I would have thought the opposite. When the snow was heavy the extra width was no advantage, the impeller couldn't move the extra volume. When the snow was light, 2" or so, the the greater the width never seemed enough.

The differential lets one wheel run faster than the other, so it is inside wheel that is powered. You are providing the force to make the turn but you don't have to fight a locked axle, engage or disengage the a free wheel, or have any cables, levers, return springs, etc to maintain. Ariens uses it, the 1330SE seems to be the only Briggs and Stratton model with it.

trouts2 wrote:

Good point trouts. I must admit I did fall for this mistake. The 28" snowblower that I really wanted was sold out for the whole winter, so I bought the next size up, a 32". It was more money, bigger, and heavier. Looking back, I should have waited another year to get the 28" that I wanted in the first place. Oh well.

My back aches just looking at those machines over 28" or 30" in width. I can't imagine bulling around something with a 32" or larger bucket unless you have an unusually long and/or wide driveway or very large areas to clear of snow. I'd probably get an a blower attachment for my tractor if I had to deal with that type of situation. I think you would be more productive with a smaller machine by being able to manuever it easier than a larger machine.

I've been using a 6HP, 24" bucket, wheeled machine for the past 10 years and just stepped up to a 9HP with a 28" bucket and tracks so it will be interesting to experience the difference this coming winter. I was a bit apprehensive to sell off my HS624WA before trying the new one under real world conditions. I decided that it was time for an upgrade and if it does not work out to my satisfaction, I'll sell the HS928TA and get HS724TA. An idiot with a plan is better than a genius without one!