Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Looks like this can be done pretty inexpensively....

http://www.youtube.com/watch?v=_Jrh4ohiF8Q

This would be an awesome mod!

Cool. Anyone else?

Yeah kinda cool but I would keep it simple as possible. Seems to ask for problems. And the one in the video is WaYYYYYY to fast to be usefull.  I've head here that wiper motors work pretty good with lots of power.

":^)

JimmyM, I'd like to see some schematics showing how you hook up the hall-effects sensors. I was thinking of using some micro switches, but they would be more prone to failure that Hall-effect I think.

Cheers

When I have some more time I'll do a little experimenting and publish the results/schematics. I have a bunch of other projects going at the moment and precious little time.

I have installed both an electric chute rotator and deflector on my blower. I am using power seat screw motors from the junk yard. They work great and are fairly easy to adapt. I have a small / short joystick that controls them both. It's mounted to the hand grip on the right side. The motors are powered by one 12v electric scooter battery. I am still amazed at how long the battery has gone without needing a charge. I live in Michigan and I've gone for three months worth of snow blowing. I finally charged it just so as not to run it down.

How about a video or some pictures, I'd appreciate seeing your handiwork.

Cheers

Trying to figure out how to post photos so they show up, and not the links. Don't have, or see the insert/edit image button. http://www.flickr.com/photos/foranyone/4412728582/ http://www.flickr.com/photos/foranyone/4412728348/ http://www.flickr.com/photos/foranyone/4412728190/ http://www.flickr.com/photos/foranyone/4411959469/ http://www.flickr.com/photos/foranyone/4412727788/ http://www.flickr.com/photos/foranyone/4412727526/

I've put 12v electric screw motors on my Ariens 1032 to control both the chute rotation and the chute deflector. They both work really well, and for me they same a lot of time. I clear a few city sidewalks so I have to be careful where I blow the snow. So I'm constantly changing the chute direction and throw distance. For anyone who's interested I shot a short video of the set up and posted it on Utube. http://www.youtube.com/profile?user=jrpesky#p/u/0/qwbfkLuhdhw

Nice setup & well engineered. What car did they come from and do both motors come from the same seat? I've tried running wiper motors on 6 volts but they still run a little fast. Yours seem to run at just about the right speed.

Cheers

Thanks for your comment. Yes both motors came off of one seat. I don't know what kind of car the seats came out of. The seats were lying in the back of a pick up at the junk yard. I usually look around and try and find seats that have already been taken out by someone else. Saves a lot of time and work letting someone else do the heavy lifting so to speak. I believe that most power seats have these type of motors with gear or screw drives. Finding ones that have some type of adaptable mounts is something that you need to be thinking about and looking for. They have all the power you could need. It takes nothing to spin the chute rotator worm gear. And lifting and holding the chute deflector is nothing for a screw motor. Another nice thing is that because the motors are hardly working at all. The power draw is very low on the battery. I've been using the setup here in Michigan since the first of December and have yet to have to charge the battery. And that battery sits outside in the cold all the time.