Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Craftsman Transaxle Blown apart
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
ramper
Joined: Dec 29, 2009
Points: 19
|
|
Craftsman Transaxle Blown apart
Original Message Feb 15, 2010 9:50 am |
|
The transaxle of my garden tractor blew up. The aluminium casing brake and I can see the gears. I need to replace it but I am not sure if there are other options. The tractor is Model number 917.2575561 Serial number 060194C 004553. I am searching for a replacement, but I have started to wonder if I have other options. Is it possible to swap another transaxle?
|
ramper
Joined: Dec 29, 2009
Points: 19
|
|
Re: Craftsman Transaxle Blown apart
Reply #2 Feb 15, 2010 10:20 am |
|
I did start there, but I did not come up with that part number. I got part number 142608 and then equivalent part 161458. Is the part you sent the same part?
|
ramper
Joined: Dec 29, 2009
Points: 19
|
|
Re: Craftsman Transaxle Blown apart
Reply #7 Feb 16, 2010 2:26 pm |
|
I had the model number wrong 917.257561 (I had an extra 5) The transaxle is a Dana 4360-82 with 5 speeds I talked to Sears today and they want close to $500 for a new transaxle (part number 142608 or 161458) and stated that the $215 transaxle is not the correct one. I have been looking at eBay and some of those seem to be options. I have a 5 speed, but if a six speed would bolt in I would just not use speed 6. I use the tractor just for snow blowing so I do not need the higher speeds. I only paid $500 for the tractor, 42 inch blower and a homemade cab so I do not want to spend too much fixing it. If you know the DIRECT bolt-up replacement unit part number (spicer, foote, etc.) please let me know. The eBay seller wildcat just told me that a spicer 6 speed would work, but I am wnat to be sure.
|
friiy
Location: Las Vegas, The Desert
Joined: Apr 12, 2008
Points: 600
|
|
Re: Craftsman Transaxle Blown apart
Reply #8 Feb 16, 2010 7:25 pm |
|
I am curious, what a happed to it?... It should be repairable.. All you need is a brake down right? I know that Peerless had breakdowns for all their models.. and all the parts are sold (or were).. Good Luck, Friiy
|
ramper
Joined: Dec 29, 2009
Points: 19
|
|
Re: Craftsman Transaxle Blown apart
Reply #9 Feb 16, 2010 8:11 pm |
|
I am not sure what happened to it. I THINK that there must have been water inside the unit. The water froze and cracked the housing. I can see gears from the outside so the top housing is gone. This is NOT good. I will take the piece off and look at repairing it. I am still interested in an entire unit as it might be worth it to not have more issues
|
hirschallan
If it aint broke don't fix it !!
Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327
|
|
Re: Craftsman Transaxle Blown apart
Reply #10 Feb 16, 2010 9:45 pm |
|
Theres lots of glues on the market theses days to repiar just about anything. If all all thats wrong with it is a crack in the casing without a problem with internals, I for one would go for the repair. My 3 cents:
This message was modified Feb 16, 2010 by hirschallan
|
|
|