Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > choose Toro 826OE for this big blizzard

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
samdog


Joined: Feb 9, 2010
Points: 55

choose Toro 826OE for this big blizzard
Original Message   Feb 10, 2010 2:00 am
The final 3 in the running were the Ariens 27 Deluxe, Simplicity L1226E and Toro 826OE. Ariens started the $$$ range at $1100, Simplicity was about $1200 and Toro topped it at $1300. I think these were pretty fair prices even on the big blizzard's eve of destruction.

I was most impressed with the Toro 826OE for it's tight tolerances in the impeller housing (about 3 mm between impeller tip and housing) and the impeller bypass that recirculates excess snow back to the auger if it's feeding in too fast. This Honda-like fit makes for efficient use of the smallish Briggs and Stratton 250 cc and in fact it throws farther than my neighbor's low tech  MTD with a rip-snortin' hemi-like 312 cc.

The 826OE is not a loaded machine -- no fancy steering or heated grips -- just a sturdy, well designed thrower with a bright light and electric start. The lighter weight of the 250 cc allows for tossability even with both wheels pin-locked. Most wives though, would probably need one free wheel to handle it with confidence. The auger gearbox is so heavy duty that Toro eliminated the shear pins -- the dealer says engine stoppage or belt slippage is your cue to investigate. Plus the scoop housing and auger have a super glossy coating that's slicker than snot -- very little sticks to it.

I like the joystick chute control -- one hand quickly adjusts for windage and elevation.  I believe it might freeze up more readily than a traditional screw gear though.  At one point it felt a bit stuck, but a firmer tug on the joystick freed it. Aiming the chute is very easy and intuitive. You can do it on the fly and there's no "turn right to go left" like on a screw gear.

The intake is well sized to the engine. I tested it out in last week's snow. The 18" had settled to an icy 14" and I ran through it in each gear.  First and second gear were cake. Third was just right -- the engine settled into it's power zone and was throwing about 35 feet.  Fourth worked almost as good as third but was uncomfortably fast around obstacles. In fifth the engine began to bog, but throwing distance was not affected much.  In sixth the engine bogged noticably and throwing distance dropped to about 20 feet. So fourth handled open stretches and second and third gave greater confidence around cars. 

The final test was EOD -- where my old 5 HP MTD would plop out ice turds and die. The plow had left 3 foot high frozen ridges imbedded with bits of gravel. Using first gear the Toro chewed right into these and flung it nicely about 20 feet. The engine was working hard in the power zone but not lugging.

I paid a bit more for the Toro 826OE, but I'm pleased with the sturdy construction and overall quality. 

Replies: 14 - 16 of 16Next page of topicsPreviousAllView as Outline
samdog


Joined: Feb 9, 2010
Points: 55

Re: choose Toro 826OE for this big blizzard
Reply #14   Feb 14, 2010 11:49 pm
Yeah, I stand corrected about Simplicity. John Deere's description of Easy Steer is more vague
and sounds like a differential, so since Simplicity makes Deere I assumed they must be similar.

Deere refers to a "Quick Pull-Knob style wheel differential" on the 827 and
"Easy Steer® drive system giving continuous power to both wheels and auto speed adjustment" on the
upper level 1130.

I didn't look as closely at Simplicity as I did at Ariens and Toro. My bad.

You've got your research down. You just need to go out and drive them.

This message was modified Feb 14, 2010 by samdog
Paul7


Joined: Mar 12, 2007
Points: 452

Re: choose Toro 826OE for this big blizzard
Reply #15   Feb 15, 2010 12:14 am
I blame the manufacturers.  I think that they do a poor job of describing their feature and benefits in both their print brochures and web sites.  They use all kinds of fancy words to describe features without drilling down to what it all means.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: choose Toro 826OE for this big blizzard
Reply #16   Feb 15, 2010 12:37 pm
I agree.  Some seem to go out of their way to over complicate what basically is a rudimentary technology.
This message was modified Feb 15, 2010 by aa335
Replies: 14 - 16 of 16Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42