Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro 824 power shift snow blower
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
clifford
Joined: Feb 4, 2010
Points: 13
![]()
|
 |
Toro 824 power shift snow blower
Original Message Feb 4, 2010 7:01 pm |
|
My belt kept coming off of my snow blower , I looked and the pulleys dont line up.Investigating this I noticed that the shaft in the front was coming in and out of the gear box.About a inch and a half. Can some one help me with this. Thanks
This message was modified Feb 4, 2010 by clifford
|
clifford
Joined: Feb 4, 2010
Points: 13
![]()
|
 |
Re: Toro 824 power shift snow blower
Reply #22 Feb 7, 2010 8:20 pm |
|
This will be my last post on this issue, I would like to thank Packo and trouts for there help.Hats off to you guys, I woke up with about 15" of snow this morning and could'nt get out to get parts.So,I looked everywhere around here for a retaining ring and behold.. The retainer ring I got off of my 2ton floor jack, The ring that holds the wheels on.This worked great. All is running and blowing well.....THANKS AGAIN.......CLIFF
|
tomjv
Location: North East
Joined: Jan 28, 2011
Points: 2
![]()
|
|
|
Re: Toro 824 power shift snow blower
Reply #23 Jan 28, 2011 9:14 am |
|
Nice pics . . . where's the grease on that gear? That thing should be swimming in Mag1 Lubriplate Toro part number 505-101. TomJV |
|
|
