Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Troy-bilt snowblower impeller works but auger stopped.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
mtoneil


Joined: Feb 6, 2010
Points: 1

Troy-bilt snowblower impeller works but auger stopped.
Original Message   Feb 6, 2010 3:06 pm
Was in heavy snow, auger now does not rotate but impeller working well.  Shear pins are fine.
Replies: 1 - 1 of 1View as Outline
nibbler


Joined: Mar 5, 2004
Points: 751

Re: Troy-bilt snowblower impeller works but auger stopped.
Reply #1   Feb 8, 2010 3:39 pm
I hope the shear pins are actually sheared and just hanging in the holes due to friction since if they are fine then the auger gears are probably broken.

With the engine off, spark plug disconnected and a 2x4 down the chute, blocking the impeller try undoing the shear pins. Hopefully they will fall apart and you can replace them.

If instead it is the auger gear box then I can't help, I've never had to fix one.
Replies: 1 - 1 of 1View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.