Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

With wet snow, the auger tends to get packed with snow.  I have found that spraying the auger and impeller with WD-40 before I get started helps immensely.  I've used cooking spray but it doesn't last as long as WD-40.

What other solutions do you use?

   For rusted chutes and output area, wire brushing and high gloss Rustoleum.   Done many chutes with before and after tests with very good results.  If the sanding is done well the coating lasts. 

   I never tried the floor wax but think it would be good if it held up through multiple storms. 

   One thing I though might be good was cross country ski wax but I'm not sure how well it would stay on.  How can you hot-wax a chute interior anyway?

   Never had much luck with oils or waxes.  They seemed to go quickly. 

    Tried strips of duct tape inside the chute which provided some slip but did not stay on well.  Too much of a pain to use for the benefit compared to paint.

   Borat mentioned something months ago which might be good.  It was some sort of crazymat or sillymat which I think kids use for sliding down a hill.  He riveted to the inside of his chute and said it was very slippery.   Never saw any around here to try it out.

    Talking about "slip-n-slide" stuff...   In aircraft use,   there is a type of thick,  adhesive back, vinyl roll material,   We place it on leading edges to retard the growth of ice and reduce pitting of the surface.  This stuff is  called "Erosion tape",   seams to hold on good at 520 mph at about -55 degrees F.   I will see if I can find a part number / manufacturer  on the stuff if you guys want to look into it...

Friiy

I have no snow sticking anywhere. Even wet snow doesn't stick enough to cause any effect on the efficiency of the machine. If it's real sticky, it will stick a bit to the side of the intake housing and maybe a bit will adhere to the gear case but that's about it. Never get enough of a build up to make a difference. As mentioned, the chute is lined with a piece of Krazy Karpet or whatever it's called now. That stuff is very durable. It's on it's third season now and looks like it has lots of life left in it yet. It's showing a bit of scuffing but that's to be expected with all the gravel and sand thats mixed in with the end of driveway deposit. It's a bit of work to make and install, but hey, if it lasts ten years or more and saves damage to the chute, it's worth it.

This Sno Jet spray has worked fine for me.  

I wax the chute and the inside of the bucket.Then I use DuPont Teflon Snow and Ice Repellent and spray it all over the auger,impeller etc.

 I never heard of using floor wax before,sounds like a great idea.

Do you guys know whocarries  sno jet spray? I see it on ebay wondering if one can get locally?

Stll bone dry here in jersey :( 

njal wrote:
Got mine from Sears.

http://tinyurl.com/y9o4ekm

thanks for the heads up will check out my local sears