Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > looking for part
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
baadlee
Joined: Dec 20, 2009
Points: 5
|
|
looking for part
Original Message Jan 6, 2010 6:39 am |
|
Hi I have an ariens model #724075 and when i got it the throttle control lever was broken off. It appears that it is rivited to the bracket that attaches over the where the carb bolts on. So basically i cant control engine speed above idle. Im having troubles finding this part, or even a part number. Any hints or help would be greatly appreciated. thanks
|
trouts2
Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328
|
|
Re: looking for part
Reply #1 Jan 6, 2010 8:45 am |
|
I think you had a typo of 724075 instead of 924075. The 924075 came with a H70-133021 in a few flavors for the throttle. For yours the throttle control bracket is called out in the drawing in a figure number but no part number listed so probably came with the cowling and as you say riveted on. One broken off throttle arm I “fixed” by cutting a can and bending it over the remainder of the arm to wrap around it and compressed it with vice grips. It stuck out enough to allow movement with gloves on. A Micky Mouse fix but it worked. An H70 from about those years was a 13066M which came with a similar throttle plate. That one was screwed in with 2 sheet metal screws. It is 34677 Control Bracket (Incl. 98, 99, 144 & 172) and about $10-20.
|
|
|