Tecumseh 8HP tuning Original Message Dec 20, 2009 10:52 am
Last year I picked up a Toro 824 Powershift blower, history unknown. When first start it, the engine hunts or surges until it gets warm then it runs fine. Is this at all normal. I tried adjusting the jet on the bottom of the float bowl and found that when I turn it in it will eventually start to miss so I turn it back out. When I try and see where it will miss on the rich side nothing happens. I can turn it out real far with no effect. I have it set about a turn of so off of the lean side. Any suggestions. I am running some Sea Foam in the gas and the oil.
