It would be tough to fault MTD for a Tecumseh broken rod. Tecumseh makes a great engine. Finding a good second hand engine for an MTD is tough because of the PTO. You could have taken the PTO out and used that in another 10hp with your crank cover. You can swap out the PTO without even draining the oil. You still have a good body so another engine is still an option. The wear parts on those are easy to replace and fairly cheap.
An 8hp MTD on an average driveway around here should be good for 15 years at least. Going after 7 years with changing oil often could have just been bad luck. You also could be over taxing the engine i.e. going in a bit too aggressively.
Average snowfall for St. Johns is 127 inches. Boston is 43.
Your average snowfall for Dec, Nov and Apr is the same as the total per year for Boston. That makes your Jan, Feb, Mar all in access of what we get here.
You are lifting three times the amount of snow per year than Boston and with drifting even more. I would not know what to expect from an engine given the conditions.
>>Other then the motor going I had constant trouble with it not being able to throw heavy
>>snow more then 4 or 5 feet
I don’t have a problem here with MTD’s. Possibly because of where you are your snow is higher and wetter. If your machine was setup right, belt tensioning, engine RPM and compression ok then you may just have snow that is too high & to wet more often than here. If the neighbors are tossing and you are not then there's a problem. I use about 10 machines a year and many MTD's. They toss close to any other machine.
>>I don't have a shed or garage
A decent grill cover works very well on a snowblower. Around here you can get a heavy duty cover with a cloth lining for $10.
With the amount of snow you get I’d lean towards an Ariens with at least an 11hp for an average size 2 car wide driveway 6 car lengths long. You might want to consider 14 or 16 inches of impeller diameter, also auger rotation RPM and impeller RPM. Ariens is at 130 on the augers and 1300 on the impeller.
This message was modified Sep 8, 2010 by trouts2