Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Ive been dealing with the issue on how to run a chainsaw after it has been started and am hoping someone on here has the answer, is it necessary to run a chainsaw at high idle after it is started? I have heard that it is not a good thing to do with the chainsaw due to it needs to be under a load to run at high idle. Can someone please clarify this, thanks.

Running the engine wide open for 30 seconds is neither necessary nor recommended. A second or two at max rpm is sufficient to ensure that the saw will run at that speed. Keeping it pegged there does nothing for the machine. Today's two stroke engines with their modern electronic ignition and stronger spark as well as leaner oil to fuel ratios reduce spark plug fouling and carbon build up in the engine. If the saws are being fired up for testing purposes, I'd start the engine, let it idle for maybe a minute then run it up to max rpms once or twice then shut it off. I cannot understand why anyone would want to run a chainsaw wide open for 30 seconds if not actually working with it. Just doesn't make sense. Ask them if they do the same with their cars?

Well, I agree with Borat....

        But also there is a saftey reason not to rev the motor.......I think if you are a firefighter you are using Carbide chains right?  These chains even though they are good to cut with are brittle on the cutting teeth (just like a carbide drill bit)...  Overspeeding is possible of the Chain , Clutch ,clutch bearings and bar tip sprocket.   Any failure of these could result in a thrown chain..  Carbide teeth when they  impact  something they chip and shatter, not to mention what damage a slung chain can do... 

  Friiy

friiy wrote:

Actually Friiy, the safety aspect completely eluded me. I've read reports that when a chain breaks, the whiplash effect at the end of the chain can throw a link with such velocity that it can easily kill a person. That's probably the best reason for not revving the engine with no load.