It looks like we're finally getting some major snow in the Philadelphia area. Forcasts are all over the place but it could be upwards of 15". Along with the snow, most of which will fall in the afternoon and through the night, we will be getting blizzard like conditions and very cold weather.
I have a paved area that is about 50' x 70' to clear as well as a 280' gravel driveway. What I have done in the past, which was only one time since there hasn't been much snow here, was to set my skids as low as possible for the paved area and raised them for the gravel area (Thank you again Robmits for the gravel skids).
I don't enjoy playing with skid heights since I'm usually hypothermic
after any given time and blizzzard conditions doesn't have a good sound to it.
The question is would you experienced guys wait for the snow to completely stop and then remove it or would you do it in stages which would require multiple skid adjustments with frozen hands. Thankfully this is happening over a weekend so there are no time factors.
Thanks for the anticipated advice. I will give you a full report on the Toro's first real test.
Jerry
