Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
durutti
Joined: Aug 31, 2009
Points: 2
|
|
Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull
Original Message Aug 31, 2009 6:22 pm |
|
My wife and I fell in love with this older Ariens reel lawnmower/snowblower, but it has been problematic. The latest is that when I started it last time, I noticed it running a bit rough with some black smoke coming out of it. Thinking that it was just a bit cold, I let it run for a couple of minutes. It died, and when I tried to pull the cord to start it, it would not pull. I took the spark-plug off to see if it was compression lock, and removed the cord mechanism to see if it was that, but neither effort was successful. I am now convinced it is something major. Is this something I can fix by cleaning the pistons and valves, and replacing the headgasket, or is it likely the engine is shot? I am some experience doing work on my car, so I should be able to do most things. In the meanwhile, I am going to get another engine until I can get this one fixed if possible. Thanks in advance.
|
durutti
Joined: Aug 31, 2009
Points: 2
|
|
Re: Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull
Reply #2 Sep 1, 2009 6:11 pm |
|
Frily, Thanks for responding. Looked all over, and cannot locate the model number on the engine. Would it help to have a photo, or is there a place I am not looking that indicates the model number. Thanks again.
|
|
|