Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
durutti


Joined: Aug 31, 2009
Points: 2

Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull
Original Message   Aug 31, 2009 6:22 pm
My wife and I fell in love with this older Ariens reel lawnmower/snowblower, but it has been problematic.  The latest is that when I started it last time, I noticed it running a bit rough with some black smoke coming out of it.  Thinking that it was just a bit cold, I let it run for a couple of minutes.  It died, and when I tried to pull the cord to start it, it would not pull.  I took the spark-plug off to see if it was compression lock, and removed the cord mechanism to see if it was that, but neither effort was successful.  I am now convinced it is something major.  Is this something I can fix by cleaning the pistons and valves, and replacing the headgasket, or is it likely the engine is shot?  I am some experience doing work on my car, so I should be able to do most things.  In the meanwhile, I am going to get another engine until I can get this one fixed if possible.  Thanks in advance.
Replies: 1 - 3 of 3View as Outline
friiy


Location: Las Vegas, The Desert
Joined: Apr 12, 2008
Points: 600

Re: Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull
Reply #1   Aug 31, 2009 9:56 pm
Please post the model of the engine so we can look at the type of motor..

Friiy
durutti


Joined: Aug 31, 2009
Points: 2

Re: Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull
Reply #2   Sep 1, 2009 6:11 pm
Frily,
Thanks for responding.  Looked all over, and cannot locate the model number on the engine.  Would it help to have a photo, or is there a place I am not looking that indicates the model number.  Thanks again.
friiy


Location: Las Vegas, The Desert
Joined: Apr 12, 2008
Points: 600

Re: Old Ariens (1970s) Lawnmower/Snowblower Cord Won't Pull
Reply #3   Sep 3, 2009 12:57 pm
The Model number should be on the rewind assy/ blower cover. The numbers on a Briggs should be on the cylinder side of cover, above the spark plug wire exit or eather side to the left or the right of it.

The number is stamped into the metal cover and is hard to notice if you have never seen it before...

It will have 3 groups of numbers with "model", "type" and "code" Written over them..

Also... are you sure the snowthrower/ mower unit is not locked up? Sometimes a unit will rust a bearing and lock up the drive, or will not allow the motor to turn freely. It is strange that the motor would run one day and be locked the next..


Good Luck,

Friiy
Replies: 1 - 3 of 3View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.