Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens Aluminum Gear Case

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
RalphS


There's a reason for more than one snowblower.
Because.
1974 Ariens 824 SnoThro
197? Ariens ST270 SnoThro
1988 Ariens ST824 SnoThro
196? REO Snowblower
1960 Ariens SnoThro
1964 Ariens SnoThro


Location: MA
Joined: Dec 21, 2004
Points: 70

Ariens Aluminum Gear Case
Original Message   Jan 19, 2005 8:48 am
I posted this on GardenWeb a few days ago, without much success.  Perhaps someone here can offer some advice:

I am trying to get the Aluminum gear case halves apart on my late 80s ST824. The halves are not sealed together (all bolts securing the halves together are removed), but there seems to be something internal holding the case together.  I am not trying too hard, because the aluminum doesn't seem too robust, but there is definitely some resistance.
I remember something about driving out a pin through a drain or fill hole, but I can't see it yet.
Any ideas for direction?
Thanks in advance. At the rate I'm going, I might even be able to use this spare SnoThro this season.
Ralph

Replies: 1 - 7 of 7View as Thread
Replies: 1 - 7 of 7View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42