Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > clearing down to bare tar

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
mattg1970


Joined: Jan 17, 2005
Points: 5

clearing down to bare tar
Original Message   Jan 17, 2005 7:46 pm
Hi, I am kinda new to snowblowers and I want to know if it is normal for a blower to leave a thin layer of snow on a smooth tar driveway? All the info i have seen on height adjustments is about 1/8 inch > I set my blower at this height and it does a great job with the snow but it leaves a thin layer of snow to top of the driveway. Is this normal?
Replies: 3 - 3 of 3Next page of topicsPreviousAllView as Outline
sawme


1Thess 4: 11-12

Location: West Virginia
Joined: Sep 13, 2003
Points: 498

Re: clearing down to bare tar
Reply #3   Jan 17, 2005 10:18 pm


             I agree with Pete.  A two stage blower IMHO shouldn't scrape the ground although that is what the 3rd setting on the Hondas are for .

            It works great till you hit a crack in the driveway or sidewalk . I tore a peice out of the Snapper blower we have at work two years ago because the skids were set too high and the scraper too low. It was a very sudden stop from fourth gear.

                Tom


Stihl 036/MS-55 YB /Homelite Trimmer/ Troy-Bilt Tiller/ MTD Rider/ Honda HS1132TA
Replies: 3 - 3 of 3Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.