Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > snow blower ran great all day and now nospark

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
greg


Joined: Jan 29, 2009
Points: 4

snow blower ran great all day and now nospark
Original Message   Jan 29, 2009 8:59 pm
Ariens snow thrower has no spark what could be wrong?
Replies: 1 - 8 of 8View as Outline
pvrp


Joined: Nov 14, 2008
Points: 151

Re: snow blower ran great all day and now nospark
Reply #1   Jan 29, 2009 10:04 pm
How old is your machine (and while your at it which model) ?

Could be the wire that goes to the plastic key thing has come loose or broken
(or you took the key out and forgot to put it back).

Paul
greg


Joined: Jan 29, 2009
Points: 4

Re: snow blower ran great all day and now nospark
Reply #2   Jan 29, 2009 10:26 pm
thanks will check wire, plastic key is in I will never forget the plastic key when I got it new i pulled it fo an hour before reading about the key once i stuck it in it started first pull.
niper99


Location: London Ont
Joined: Dec 2, 2007
Points: 354

Re: snow blower ran great all day and now nospark
Reply #3   Jan 29, 2009 10:35 pm
how old is your machine and what engine is it ? we need to know that info to help u out.
greg


Joined: Jan 29, 2009
Points: 4

Re: snow blower ran great all day and now nospark
Reply #4   Jan 29, 2009 10:52 pm
it is an 11528 about 4 years old
niper99


Location: London Ont
Joined: Dec 2, 2007
Points: 354

Re: snow blower ran great all day and now nospark
Reply #5   Jan 29, 2009 11:12 pm
while in that case the ignition system is electronic and that being said tecumsech or briggs has a pretty much flawless ignition system, like the other guy was saying its probally one of the kill switchs that are causing your problem, i dont know if theres a plug that u can discounect,  what l do is give it a quick visual see if u can see any jumping out at yeah if not u could cut the wire that joins all the kill switchs and see if its starts if it does then one of the switchs is groud out causing your problem, before u do that l would replace spark plug (first step), and if your still not getting spark after that then your going to need to start removing the engine cover for further inspection of the eletrical componets Ie ignition coil assembly but is not likely the problem.
This message was modified Jan 29, 2009 by niper99
ajc165


Joined: Feb 1, 2009
Points: 3

Re: snow blower ran great all day and now nospark
Reply #6   Feb 1, 2009 3:36 pm
my ariens did the same thing last week ,,,it stopped dead with no warning...i removed the the spark plug and cleaned it,,,,it fired right back up....why the plug got so dirty i don't know....btw....my machine is new this season   it's a 11/ 30
greg


Joined: Jan 29, 2009
Points: 4

Re: snow blower ran great all day and now nospark
Reply #7   Feb 2, 2009 6:44 am
I pulled plug it is dirty but when pulling rope with plug hooked to wire no spark at all does this mean plug is bad or do i have other problems? I also pulled the cover that covers carburator seems there are only two wires that kill it the one for the plastic key and the one for the throttle, they both seem to be in great shape.
nibbler


Joined: Mar 5, 2004
Points: 751

Re: snow blower ran great all day and now nospark
Reply #8   Feb 6, 2009 6:59 am
There are normally two kill switches:
  1. The one that the "ignition" key disconnects;
  2. The one that is engaged when the throttle is in the bottom (slow, turtle, off) position.
In both cases they short the ignition to ground by connecting to the engine body.

You can get a spark tester that will indicate whether or not there is a charge going through the wire to the spark plug. If you are using the "I see a spark in the plug" technique then you need to make sure the base of the plug has good electrical contact with the engine body and it is dark enough for you to see the spark. I normally put a new plug in every year or two but cleaning and gapping are also a good idea.

The other thing to check is whether you are getting gas. If you try to start it for a while and then pull the plug is it wet? It should be. Sometimes injecting a little bit of gas through the spark hole, replacing the spark plug will help. If the motor starts and then dies then its a fuel problem and not electrical. I once got a blower going by doing the fuel injection trick twice. On the second time things started working. I had also put Seafoam, a carburettor cleaner, in the fuel tank. That blower still starts but I plan to do some maintenance once the season is over.
This message was modified Feb 6, 2009 by nibbler
Replies: 1 - 8 of 8View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.