Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I just purchased a Troy-bilt Storm 2410 snowblower about a week ago.

When I start my snowblower, I turn the choke fully clockwise to close the butterfly(choke is fully on).  I prime it 3-4 times and On the first or second pull it starts. 

As it warms up I slowly turn the choke knob counterclockwise to open the butterfly.  Unfortunately, I reach max engine rpm at about 2/3 to 3/4 choke opening.  I cannot get to full open(choke is off) on the choke.  The choke does not have a true on and off spot marked on the engine.  There is a sticker indicating a gradation from a small, narrow wedge to a large open wedge (at this end there is a picture of a butterfly valve opened)

Is there something wrong?  I have been on a tractor where it would not run if the choke was opened fully.  I do not know if this is correct or if the carb is out of adjustment.

Frank

The decal show a curved wedge which is narrowest at the top and widest at the bottom. It curves around the left side of the knob.   At the bottom is a picture of a partially opened butterfly valve.  To me if I want the valve closed, I would point the knob to the narrowest section, since the picture shows the valve open at the other end, hence I would be turning it clockwise.  Unfortunately this too is counter intuitive.  I guess the symbol should have been put at the top.  At the narrow end and a closed valve at the larger bottom end.  They should have labeled one end 'FULL' and the other 'OFF', just like they do in the instructions.  Ironically, the manual has the sticker displayed as a mirror image of what is on the machine....

you can get the manual here (I think)

http://lawnandgarden.owneriq.net/manuals/mfg/troybilt/2410.html

On page 11 they talk about the choke and its operation.
Page 14 discusses starting.