Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > question on lubricating sprays

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
mikiewest


Joined: Dec 29, 2007
Points: 262

question on lubricating sprays
Original Message   Jan 22, 2009 10:31 am
My snowblower says to use a med weight 10w oil to lubricate points on the snowblower.Can u use any of these sprays that also lubricate since some of them say they dont attract dirt.Or is a 3 in 1 oil sufficient?
Replies: 1 - 1 of 1View as Outline
borat


Joined: Nov 10, 2007
Points: 2692

Re: question on lubricating sprays
Reply #1   Jan 22, 2009 3:08 pm
I use a light multi purpose oil in a spray can for lubing cables & tight hinges.  Pivot points for control levers usually get a burst of white lithium grease also from a  spray can.   My rule of thumb is that if I can't get spray grease into a friction point, use oil.   
Replies: 1 - 1 of 1View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.