Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > HELP toro 7/24

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
NBR3


Joined: Jan 15, 2009
Points: 1

HELP toro 7/24
Original Message   Jan 15, 2009 8:15 pm
HELP,

I have a Toro 7/24  Model 38050 ser 0017886.  Engine is a Tecumsen H70-130176E.

I changed the oil by removing the Cap Nut at the end of the drain pipe.  I refilled with new oil.  Started blowing snow and noticed oil drops in the snow.  I looked down and oil was spraying out of the breather hose.  I check the oil level and there was none on the dip stick.

Anyone have any idea why it did this?

Thanks. 

Replies: 2 - 2 of 2Next page of topicsPreviousAllView as Outline
xenorias


Location: Sainte-Sophie, Quebec, Canada
Joined: Jan 7, 2009
Points: 26

Re: HELP toro 7/24
Reply #2   Jan 16, 2009 11:30 am
As Borat said!

Letting the engine sit a few minutes will allow the oil to settle. Also, remember that new oil is cleaner and harder to see of the dipstick, and letting it cool down will make it stickier and easier to see.

Replies: 2 - 2 of 2Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.