Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

Easy SteerŪ drive system giving continuous power to both wheels and auto speed adjustment

Is it similar to the Ariens auto differential? 

I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

Rick

borat wrote:
I believe the 9526 DLET is the only machine that hasn't gotten any bad reviews.

And then there are the Hondas...

Paul

Just returned my John Deere 1130 SE to Lowes today.  Boy did they fight me on the return, and refunding my money.  I guess, after spending $ 2000 dollars on a power tool, and returning it in a few days, they don't like taking the loss.  Mine would slip in forward and reverse, only after an hour or so.  Then it would dry out in a heated garage, and work " gangbusters" again, and then it would start slipping again.  After returning it, a repairman at Lowes said he worked on the belt tension, and wanted me to come and buy it back from them again.  He said he adjusted cables, and dried everything off, and now it was working, but he didn't try it in snow.  When I spend this kind of money, I shouldn't have to get everthing adjusted every couple of hours of use.  Plus I spent  $250 dollars on a 2 year extended warrenty.   I went
down the road to a Husqvarna dealer, spent less money for the same 1130 SB machine, was given a 3 year factory warrenty, given 2 free tune ups, and for $ 50 dollars was given another 2 year extended warrenty, (Thats a 5 year warrenty).  I have been working this thing to death, in hard packed snow, "NO PROBLEMS", No Adjustments, No Slippage.  The idea of the customer fixing the problem, with aluminum tape, to stop the leaking, is absurd, and asinine.   HEY JOHN DEERE, here is a solution, FIX THE PROBLEM       Obviously not happy, with the way I was treated, after being a longtime customer at LOWES

I also have noticed the problem with machine I am really regretting making this purchase but was under the gun my old toro didnt want to run and I said to heck with it and went to get a new blower went to lowes tojust look at the deere and seen the price was amazed was 1499.00 but 10% off sale plus sign up for lowes card get another 10 off so saved 260.00 knew I wasnt going to beat the deere dealer down that much or any other dealer in the middle of January so I bought it ,got it home light didnt work so I looked around found that was unplugged so no big deal then used it heated grips didnt work so found broken wire so I fixed that now the drive thing am begining to think I should have gone and bought the cub cadet i already paid the lowes card,I love the way the briggs run nice and quiet and the thing blows snow well but the drive thing pisses me off really i didnt think much of the wires I saved so much I said what the hell just fix it and shut up but now.Not what I expected out of a Simplicity built machine thats for shure...

Just bought my JD 1130 se today from lowes, here in n/e ohio its a hit or miss for snow fall here and lately its been a hit! After digging my car out that barely made it into the driveway last night I was off to home depot to check out some possible snow blowers. Arrived at the depot to find a cheesy little 2 stage unit for 999.00 and 3or so single stage units way overpriced. At this point was becoming content with the shovel situation, oh and by the way they had 2 stacker shelves loaded with all the lawn mowers one could imagine, MID January!?! Well after my subway sandwich decided to check out lowes not so far down the road. The very 1st thing I saw as I entered the store was a line of JD snow blowers ready to do some damage. Decided on the JD 1130 SE with the 20% off and an extra 10% if you get the lowes credit card for a total of 30% off 1499 my unit cost 1074 before tax fully assembled and out the door.

Now lets put my impulse purchase to the test. Got home and unloaded unit, adjusted guides, filled tank, figured out that the pin had to be installed to start and whalla! she fired up.had a good 8 to 10 Inches in driveway with some drifts over 2 feet. This thing ate up everything I could throw at it not a single hiccup, did occasionally rev lower under load as expected, also did several neigbours driveways and the unit worked flawlessly. Still getting used to it since ive never operated a snowblower before, been long overdue!

Is it just me or am I an old person now, the shovel was a nice work out but any more theres just not enough time in the day.. whats next ED??

no drive issues?reverse ocasionally not work or whatever?

Sounds to me like JD is having the same kind of set up issues at Lowes that Ariens is having at Home Depot. With Snow Blowers it's all about the set up. If you can read and execute simple instructions it is a BIG advantage to take the machine home in the box and do the set up yourself. It's no more difficult than putting together most childrens toys.

Unfortunately set up at a big box store sometimes = molestation,

Marc

Hello,

Let me say that a consumer should not have to put metal duct tape on a machine, but Lowes gave me 20% of for my problems final cost 1200.00 in New Hampshire. I also bought the John Deere cab for another 140.00. To the poster who said they bought a husky and is very happy with it good for you and good luck. But please do not compare the Husky to the Simplicity/John Deere. I will live with the tape. These machines are not apples to apples Cast Iron gear box JD Briggs Engine still in business. The JD has 1550 torq not sure about husky but I'M sure its not more. I do understand that many consumers would not be happy with tinkering with a new purchased product and should not have to but for 1200 its a steal. Another poster got it for under 1100 that is a real winner of a bargain. Just my thoughts anyone else think the JD is worth the extra work or am I crazy. I also own a Husky Lawn Tractor and am very happy with it but just does not seem to be as sturdy as JD.

Don

mml4 wrote:

In my area Lowes contracts out to the local John Deere dealership, who is sold out of snow throwers to do the final assembly on their snow throwers.  Not even close to Home Depot final assembly.  Problems can happen anywhere these days and some Home Depot guys can do a good job too, but I liked that the JD dealership put mine together.

Rick

went out this am to use blower and started up wouldnt move gave cable a tug pulled tighter on it and still nothing finnaly acted like it was going to start to drive like it should what a machine looks like theres going to be a trip back to lowes with it ........What a bad purchace I made here never ever again from a big box store

I've been reading this thread off and on for some time and it seems that the manufacturers are missing the point.

Engaging rant mode, put on fire retardant eyeglasses.

Snow blowers work in wet, cold conditions, snow gets into everything and can melt. Repairs are sometimes done outside of a warm dry shop, it may even be blowing snow and/or sleet while a belt is changed. That is the nature of the environment that the machine must work in. Saying that the whole thing is dependant on a particular part staying dry is the equivalent of saying "we make trash". It simply must work in a cold wet environment, duct tape, adjusted plastic covers whatever are band aids that don't solve the root cause of the problem, the friction disk must work while wet end of story, full stop. If it can't be made to work then you come up with another, maintainable, robust solution.

End of rant.

I have used my machine with the cover off while adjusting the auger belt tension. I would "do a line of snow" to test it and then possibly readjust to get it "just right". I never had a problem with the traction drive just stopping. I have had to adjust the tension on the traction drive cable a few times over the years but so far I consider it normal wear and tear on a machine that regularly does multiple driveways and on occasion clears 1/2 metre snow an 75M of gravelled driveway.

One final comment. If the friction disk is turning at any reasonable rate I would expect any water to fly off due to centripetal force.