Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > John Deere 1130 SE

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Clay


Location: Wis
Joined: Dec 3, 2008
Points: 111

John Deere 1130 SE
Original Message   Jan 7, 2009 1:07 pm
I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

  • Easy Steer® drive system giving continuous power to both wheels and auto speed adjustment
  • Is it similar to the Ariens auto differential? 

    I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

    Rick

    Replies: 331 - 333 of 333Next page of topicsPreviousAllView as Outline
    runkster


    Joined: Jan 5, 2014
    Points: 2

    Re: John Deere 1130 SE
    Reply #331   Jan 5, 2015 10:07 pm
    The clutch and cover repair kit is available through amazon.com: http://www.amazon.com/gp/product/B0043RTP3O/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Replaces Murray parts 1687300SM and 1678452YP
    This message was modified Jan 5, 2015 by runkster
    Swoods


    I love all power equipment from lawn mowers to snow blowers. My favorite pieces of equipment are 2 cycle Lawn Boys.

    Location: Elburn, IL
    Joined: Nov 21, 2009
    Points: 65

    Re: John Deere 1130 SE
    Reply #332   Jan 7, 2015 9:19 pm
    I may have to order that kit that runkster mentioned.  I put that metal plate in the gap behind the belt cover/sheer bolt holder, but I don't have that big, flat, rubber piece.  I'm guessing that fits on the inside top of the transmission housing to prevent water from dripping on to the friction disc? 

    Sean Woods
    NorthMaine


    Joined: Feb 6, 2015
    Points: 2

    Re: John Deere 1130 SE
    Reply #333   Feb 6, 2015 7:23 am
    Swoods wrote:
    I may have to order that kit that runkster mentioned.  I put that metal plate in the gap behind the belt cover/sheer bolt holder, but I don't have that big, flat, rubber piece.  I'm guessing that fits on the inside top of the transmission housing to prevent water from dripping on to the friction disc? 
    The rubber is for that yes. I just bought the machine and though mine came with the engine plate, it doesn't have the rubber piece under the engine mounting plate. Been chasing leaking water for a few weeks now. Thought I had it but found the black push clip thing under the engine leaking still so I just took it right out and siliconed the hole. Hopefully I am done...
    This message was modified Feb 6, 2015 by NorthMaine
    Replies: 331 - 333 of 333Next page of topicsPreviousAllView as Outline
    Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
    AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
    Copyright 1998-2024 AbbysGuide.com. All rights reserved.