Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I just received a non-working Jacobsen Imperial 826 and where there should be a key to turn on and off the machine there is nothing but a wire.  This snowblower has an HM80 engine and there is not a spark produced.  I can post pictures if there is anything you would like to see to help, I'd like to just put a rocker switch on but I am not really sure what else might be required.

Thanks in advance!

Your model is a 52040T and the engine HM80 155015E if original.

That's a nice snowblower. It's solid, the tractor section is the standard basic design and built well, the auger gearbox is ok, has grease fittings, nice auger blades and the usual crummy cheap handles everyone used then that flop around and rattle. Like most of the older well built snowblowers the bodies outlasted their motors. If you motor has ok compression you'll have a nice snowblower when you get spark back.

Jacobson does not make the big two stages anymore and does not support them. Parts are available though at least the parts that will possibly break under normal use will be available. Many parts cross to other makers so around. Your pin is 342449 google that and you can probably find a supplier that lists the bolt size. Any breakable bolt is ok.

ke

Excellent, thanks for the help, I was able to find the right size shear pin and I will post back tonight if I can get anything to work!  Thanks again!

Ok, so I definitely have spark now.  the carburetor is leaking from the main nozzle when I prime it more than a couple times.  So it leaks out the main nozzle and then drips out the back of the choke part of the carburetor.

I have taken the carburetor apart but I will have to look around for a rebuild kit, probably all gone in town.  Anything specific that I should be looking to replace in the carb?

Thanks for all your help trouts2, I probably wouldn't have figured out the spark issue if you hadn't sent me the scenarios...I really appreciate it and after a good carb cleaning the blower runs like a champ!!!  Thanks again for all of you help.

Pldawg,

   Nice work.  You’ve got yourself a great machine at a great price.  It may not toss as far as a new machine but it will dig in better than most and probably match or beat newer machines on throughput. 

David