Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Frontier Model STO726 Auger- one is working the other is not

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Patrick


Joined: Dec 19, 2008
Points: 2

Frontier Model STO726 Auger- one is working the other is not
Original Message   Dec 19, 2008 5:38 pm
I have a Frontier Model STO726. Inheirited from my father in law.  I used it today to do the driveway and one of the augers (left side as you face the front) is not turning and pushing snow into the impeler while the the other is, when the handle is engaged.  When I have it sitting and engage the handle both augers seem to be turning.  With the engine off and spark plus disconnected I checked by hand.  The one that is moving snow into the impeler doesn't turn by hand with the engine off, while the auger that isn't pushing snow into the impeler seems to turn freely, like no gear is engaged.  My hunch is the shear pin needs to be replaced but I am looking for guidance. Second, I can't find the service/product manual so I am not sure where to look to find the shear pin so I can replace it and third, not sure what is a new pin part # to get at the local dealer/repair shop.  All that said, any help with either a link to or copy of a manual, guidance on where on the machine to find the shear pin and guidance whether this is in fact a shear pin issue would be helpful.  We are of course now getting 8-12" tonight and I'd like to use this machine with fully engaged augers to do the driveway.

Replies: 4 - 5 of 5Next page of topicsPreviousAllView as Outline
Patrick


Joined: Dec 19, 2008
Points: 2

Re: Frontier Model STO726 Auger- one is working the other is not
Reply #4   Dec 20, 2008 12:32 pm
Folks,

Thanks for the replies and guidance. It was in fact the shear bolt; Once I actually knew where to look it was a no brainer.  And, luckily the machine has a box right on the engine block head that says "Shear Bolts" and I had two, count 'em two, replacement bolts. So I was back in business quickly.  Now the driveway is clear.  And, to be a good neighbor I went over and did my neighbors driveway cause he was having problems with his 40 year old machine.  Thought it appropriate to "Pass it on".  Thanks for the help.

friiy


Location: Las Vegas, The Desert
Joined: Apr 12, 2008
Points: 600

Re: Frontier Model STO726 Auger- one is working the other is not
Reply #5   Dec 20, 2008 7:34 pm
Be sure they are shear bolts,   If you put them in..... If you have real bolts in the unit and you hit something.   You can trash your machine.. ALways keep a few in the that box,  when you need them and it is empty it is too late..

Friiy

Replies: 4 - 5 of 5Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.