bmac2985
Joined: Nov 24, 2008
Points: 4
![]()
|
 |
Gear case seal leaking
Original Message Nov 29, 2008 7:27 pm |
|
Hey guys,
I have a thirty year old Ariens snowblower (model 922024) that runs great. When I changed the fluid in the gear case
everything seemed fine. However, a couple days later I started it up and noticed that after running the auger
the rear seal, where the shaft comes out and goes to the large pulley, was leaking.
The oil I used was gear lube MP80/90EP. Could this cause the problem? Or could a
30 year old seal be the problem.
Any suggestions???
Brian
|
