Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Re-engined Ariens, old had 1" crank, new has 3/4", where can I find a new pulley?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
eb55


Joined: Mar 29, 2008
Points: 1

Re-engined Ariens, old had 1" crank, new has 3/4", where can I find a new pulley?
Original Message   Mar 29, 2008 6:55 pm
Replaced the worn 5 hp Tecumseh engine on my Ariens ST524 with a 7.5 B&S Intek Snow engine, but the old 5 hp engine used a 1" bore pulley (4L for auger drive, 3L for wheel drive), the new engine has a 3/4" shaft. Does anyone make a dual pulley in the 3/4" bore size, or do I need to install 2 individual pulleys, and where can I find them?? Thanks all.
Replies: 4 - 4 of 4Next page of topicsPreviousAllView as Outline
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Re: Re-engined Ariens, old had 1" crank, new has 3/4", where can I find a new pulley?
Reply #4   Nov 3, 2008 8:37 am
   A person has given me a reference for 1 inch to 3/4 pulley bushing.  There is also a key cut 3/16'ths and 1/4 to cover the key mismatch. 

http://www.smallenginewarehouse.com/product.asp?PN=Sleeve-34-1x220

trouts2

Replies: 4 - 4 of 4Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.