Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Connecting fuel line Tecumseh engine

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
esfny


Joined: Sep 11, 2008
Points: 2

Connecting fuel line Tecumseh engine
Original Message   Sep 11, 2008 12:37 pm
I am a newbie so thanks for any help. I have a Tecumseh OHH55 (new model# OH195EA) four cycle engine, which is on my chipper schredder. I have a question about where the fuel lines connect. I see where the hose from the tank to the carb goes, and I can see where the hose from the carb goes out, but I don't know where it connects to the engine. I need to change that hose because it is all cracked and falling apart.

I purchased the Tecumseh technician handbook, and have an operator's manual, but believe it or not neither specify or diagram where this hose connects from and to.

So if anyone can tell I would greatly appreciate it.

Thanks,

Ernie
Replies: 4 - 4 of 4Next page of topicsPreviousAllView as Outline
mech12


Joined: Feb 20, 2006
Points: 273

Re: Connecting fuel line Tecumseh engine
Reply #4   Sep 19, 2008 2:48 pm
   that would be the primer line.
Replies: 4 - 4 of 4Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.