Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Connecting fuel line Tecumseh engine
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
esfny
Joined: Sep 11, 2008
Points: 2
|
|
Connecting fuel line Tecumseh engine
Original Message Sep 11, 2008 12:37 pm |
|
I am a newbie so thanks for any help. I have a Tecumseh OHH55 (new model# OH195EA) four cycle engine, which is on my chipper schredder. I have a question about where the fuel lines connect. I see where the hose from the tank to the carb goes, and I can see where the hose from the carb goes out, but I don't know where it connects to the engine. I need to change that hose because it is all cracked and falling apart.
I purchased the Tecumseh technician handbook, and have an operator's manual, but believe it or not neither specify or diagram where this hose connects from and to.
So if anyone can tell I would greatly appreciate it.
Thanks,
Ernie
|
esfny
Joined: Sep 11, 2008
Points: 2
|
|
Re: Connecting fuel line Tecumseh engine
Reply #3 Sep 19, 2008 12:01 pm |
|
Sorry for the bad description. There is a 2nd rubber hose that is connected to a 2nd nipple on the carb (this is not the fuel line hose connection between the fuel tank and the carb), and I cannot see where the other end of that hose connects to. Or what function it performs. It comes out of the lower portion of the carb.
Thanks,
Ernie
|
|
|