Hello all
I have an old 5ph engine off a tiller Engine model 130202. It's running very very rich. I disassembled the carb and cleaned it out with carb cleaner and compressed air.
The only adjustment screw on the side of carb makes no difference what so ever. I screwed it all the way in and completely out with no change at all. It will only run at full throttle but barely above idle. The choke butterfly is straight up & down as it should be.
This engine is new to me so I can't say there aren't other issues with it.
I put a new diaphram & gaskets when I cleaned it.
Any help or ideas?
