Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Jacobsen Homelite Imperial 826 Parts needed
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
jam32
Joined: Mar 3, 2008
Points: 3
![]()
|
 |
Jacobsen Homelite Imperial 826 Parts needed
Original Message Mar 3, 2008 10:22 am |
|
Anyone know where to get parts? I have a complete part sheet from 2000 from when Textron owned Jacobsen but can not find anyone that sells parts. Need the roller bearings for the drive gear this is the gear with the chain going to the wheel shaft. Also would like to get a throttle lever with cable as mine was replaced by a choke lever before I got it. Thanks, Jeff
|
jam32
Joined: Mar 3, 2008
Points: 3
![]()
|
 |
Re: Jacobsen Homelite Imperial 826 Parts needed
Reply #2 Mar 3, 2008 2:42 pm |
|
AJ, Thought i answered your last post but here goes again. Yes that is a cross for the needle bearing I need. I have ordered two and for $27.00 will see if they work. Only one place in Ohio has them. I wish I could find other parts. One I really would like is the throttle lever and cable. I am using a universal choke lever know. I have to carry different lengths of rubber hose to keep it at the desired speed. Jeff
|
|
|
