mpkeon
Joined: Feb 27, 2008
Points: 2
![]()
|
 |
toro sheer pins vs bolts
Original Message Feb 27, 2008 8:11 am |
|
I bought a brand new toro snowblower (10 HP) a few years back, this is probably the fourth season in operation. It was back to the dealer twice the first season because instead of sheer pins the case hardened bolts that are supposed to shut down the mach. turned through the auger sleeve rendering it useless. My dealer's solution was to install "sheer pins". They seemed a bit long, but worked. Well now i have to replace them, the old one were 1/4" bolts, is that a standard size for a sheer pin? And are sheer pins just reall a scored bolt?
|
